APC Battery Management System manual Email Recipients, Setting Description To Address, Send via

Battery Management System

USER’S GUIDE

®

Email Recipients

To identify up to four e-mail recipients to be notified of events, use one of the following:

•The Recipients option of the Web interface’s Events menu

•The Email option of the control console’s Network Menu

Setting	Description
To Address	Defines the user and domain names of the recipient.
	To use e-mail for paging, use the e-mail address for the recipient’s
	pager gateway account (for example, myacct100@skytel.com). The
	pager gateway pages the recipient.
	Note: The recipient’s pager must be able to use text-based messaging.
Send via	Selects one of the following methods for routing e-mail:
	• Through the Battery Management System’s SMTP server (the
	recommended option, Local SMTP Server). E-mail is sent before the
	Battery Management System’s 20-second timeout, and, if necessary,
	is retried several times.
	• Directly to the recipient’s SMTP server (the Recipient’s SMTP Server
	option). On a busy remote SMTP server, the timeout may prevent
	some e-mail from being sent, and with this option, the Battery
	Management System tries to send the e-mail only once.
	When the recipient uses the Battery Management System’s SMTP
	server, this setting has no effect.
Email	Enables (by default) or disables sending e-mail to the defined recipient.
Generation

84