Battery Management System
USER’S GUIDE
®
Option Settings
TCP/IP
This option accesses the following settings:
•Boot mode setting: Selects the method used to define the TCP/IP values that a Battery Management System needs to operate on the network:
–System IP: The IP address of the Battery Management System
–Subnet Mask: The subnet mask value
–Default Gateway: The IP address of the default gateway
For information about the watchdog role of the default gateway, see Resetting the network timer.
To configure the initial TCP/IP settings when you install the Battery Management System, see the Battery Management System Installation and Quick Start Manual
See also (.\doc\en\insguide.pdf), provided on the APC Battery Management System Utility CD and in printed form.
•Advanced settings: Defines the Battery Management System’s host and domain names, as well as Ethernet port speed, BOOTP, and DHCP settings used by the Battery Management System.
Current TCP/IP settings fields. The current values for System IP, Subnet Mask, and Default Gateway, and the Battery Management System’s MAC Address, Host Name, Domain Name, and Ethernet Port Speed values are displayed above the TCP/IP settings in the control console and the Web interface.
33
