APC Battery Management System manual Snmp interface

Battery Management System

USER’S GUIDE

®

Telnet. To access the Battery Management System’s control console using Telnet:

1.Use the command telnet and the IP address of the Battery Management System. For example:

telnet 170.215.6.49

2.Press the ENTER key to open the Telnet session and display the User Name prompt.

Logging on. To log on to the control console, respond to the User Name and Password prompts. The default user name and password for the Administrator account are both apc, all lowercase. You can change the user name, password, and time-out values through the System menu.

See User Manager.

SNMP interface

To use SNMP to configure the Management Card or to use the Battery Management System traps for event notification, you must use version 3.6.9 (or later) of the APC PowerNet MIB.

See the APC MIB Reference Guide (.\doc\en\mibguide.pdf) provided on the APC Battery Management System Utility

See also CD.

12