APC Battery Management System manual Recipients Option, Trap Receivers

Battery Management System

USER’S GUIDE

®

Recipients Option

Trap Receivers

You can define up to four NMSs to be used as trap receivers when an event occurs that has SNMP traps enabled.

In the Web interface, use the Trap Receiver settings, available through the Recipients option of the Events menu.

In the control console, use the SNMP option of the Network menu.

Item	Definition
Community Name	The password (15 characters or less) used when traps are sent
	to the NMS identified by the Receiver NMS IP/Domain Name
	setting.
Receiver NMS IP/	The IP address or domain name of the NMS to which traps are
Domain Name	sent. If this setting is 0.0.0.0 (the default), no traps are sent to
	any NMS.
Generation (Web	Enables (by default) or disables the sending of any traps to the
interface)	NMS identified by the Receiver NMS IP/Domain Name
Trap Generation	setting.
(control console)
Authentication Traps	Enables or disables the sending of authentication traps to the
	NMS identified by the Receiver NMS IP/Domain Name
	setting.

83