ZyXEL Communications Wireless Gateway Series 13.3 Configuring TELNET, Table 13-1Telnet, Figure 13-2Telnet, The following table describes the labels in this screen

ZyAIR Wireless Gateway Series User’s Guide

13.3 Configuring TELNET

Click ADVANCED and then REMOTE MGNT to open the TELNET screen.

		Figure 13-2 Telnet
The following table describes the labels in this screen.
		Table 13-1 Telnet
	LABEL	DESCRIPTION
	Server Port	You may change the server port number for a service if needed, however you must
		use the same port number in order to use that service for remote management.
	Server Access	Select the interface(s) through which a computer may access the ZyAIR using this
		service.
	Secured Client	A secured client is a “trusted” computer that is allowed to communicate with the ZyAIR
	IP Address	using this service.
		Select All to allow any computer to access the ZyAIR using this service.
		Choose Selected to just allow the computer with the IP address that you specify to
		access the ZyAIR using this service.
	Apply	Click Apply to save your changes back to the ZyAIR.
	Reset	Click Reset to begin configuring this screen afresh.

Remote Management 13-3