ZyAIR Wireless Gateway Series User’s Guide

 

Table 13-6 SNMP

 

 

LABEL

DESCRIPTION

 

 

Set Community

Enter the Set community, which is the password for incoming Set requests from the

 

management station.

 

 

Trusted Host

If you enter a trusted host, your ZyAIR will only respond to SNMP messages from this

 

address. A blank (default) field means your ZyAIR will respond to all SNMP messages

 

it receives, regardless of source.

 

 

Trap

 

 

 

Community

Type the trap community, which is the password sent with each trap to the SNMP

 

manager.

 

 

Destination

Type the IP address of the station to send your SNMP traps to.

 

 

SNMP

 

 

 

Server Port

You may change the server port number for a service if needed, however you must

 

use the same port number in order to use that service for remote management.

 

 

Server Access

Select the interface(s) through which a computer may access the ZyAIR using this

 

service.

 

 

Secured Client

A secured client is a “trusted” computer that is allowed to communicate with the ZyAIR

IP Address

using this service.

 

Select All to allow any computer to access the ZyAIR using this service.

 

Choose Selected to just allow the computer with the IP address that you specify to

 

access the ZyAIR using this service.

 

 

Apply

Click Apply to save your changes back to the ZyAIR.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

13.7 Configuring DNS

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice versa, for example, the IP address of www.zyxel.com is 204.217.0.2. Refer to the Internet Access chapter for more information.

To change your ZyAIR’s DNS settings, click ADVANCED, REMOTE MGNT and then the DNS tab. The screen appears as shown.

13-10

Remote Management