ZyAIR Wireless Gateway Series User’s Guide

Table 19-4 Menu 3.5 Wireless LAN Setup

FIELD

DESCRIPTION

EXMAPLE

 

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

19.4.1 Configuring MAC Address Filter

Your ZyAIR checks the MAC address of the wireless station device against a list of allowed or denied MAC addresses. However, intruders could fake allowed MAC addresses so MAC-based authentication is less secure than EAP authentication.

Follow the steps below to create the MAC address table on your ZyAIR. Step 1. From the main menu, enter 3 to open Menu 3 – LAN Setup. Step 2. Enter 5 to display Menu 3.5 – Wireless LAN Setup.

Menu 3.5 - Wireless LAN Setup

ESSID= Wireless

Hide ESSID= No

Channel ID= CH01 2412MHz

RTS Threshold= 0

Frag. Threshold= 2432

WEP Encryption= Disable

Default Key= N/A

Key1= N/A

Key2= N/A

Key3= N/A

Key4= N/A

Authen. Method= N/A

Edit MAC Address Filter= No

Edit Roaming Configuration= No

Block Intra-BSS Traffic= No

Number of Associated Stations= 32

Breathing LED= Yes

Output Power= 17dBm

Press ENTER to Confirm or ESC to Cancel:

Figure 19-9 Menu 3.5 Wireless LAN Setup

Step 3. In the Edit MAC Address Filtering field, press [SPACE BAR] to select Yes and press [ENTER]. Menu 3.5.1 – WLAN MAC Address Filter displays as shown next.

LAN Setup

19-9