ZyAIR Wireless Gateway Series User’s Guide

The following table describes the labels in this screen.

 

Table 15-5 LAN IP Address Report

 

 

LABEL

DESCRIPTION

 

 

Start Collection/

The button text shows Start Collection when the ZyAIR is not recording report data and

Stop Collection

Stop Collection when the ZyAIR is recording report data.

 

Click Start Collection to have the ZyAIR record report data.

 

Click Stop Collection to halt the ZyAIR from recording more data.

 

 

Refresh

Click Refresh to update the report display. The report also refreshes automatically when

 

you close and reopen the screen.

 

 

IP Address

This column lists the LAN IP addresses to and/or from which the most traffic has been

 

sent. The LAN IP addresses are listed in descending order with the LAN IP address to

 

and/or from which the most traffic was sent listed first.

 

 

Direction

This field displays Incoming to denote traffic that is coming in from the WAN to the LAN.

 

This field displays Outgoing to denote traffic that is going out from the LAN to the WAN.

 

 

Amount

This column displays how much traffic has gone to and from the listed LAN IP

 

addresses. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) varies with

 

the amount of traffic sent to and from the LAN IP address. The count starts over at 0 if

 

the total traffic sent to and from a LAN IP passes the bytes count limit (see Table 15-6).

 

 

15.3.3 Reports Specifications

The following table lists detailed specifications on the reports feature.

 

Table 15-6 Report Specifications

 

 

 

LABEL

 

DESCRIPTION

 

 

 

Number of web sites/protocols or

 

20

ports/IP addresses listed:

 

 

Hit count limit:

 

Up to 232 hits can be counted per web site. The count starts over at 0

 

 

if it passes four billion.

 

 

 

Bytes count limit:

 

Up to 264 bytes can be counted per protocol/port or LAN IP address.

 

 

The count starts over at 0 if it passes 264 bytes.

Logs Screens

15-11