ZyXEL Communications Wireless Gateway Series Table 19-5Menu 3.5.1 WLAN MAC Address Filter, Figure 19-10Menu 3.5.1 WLAN MAC Address Filter

ZyAIR Wireless Gateway Series User’s Guide

Menu 3.5.1 - WLAN MAC Address Filter

Active= No

Filter Action= Allowed Association

------------------------------------------------------------------------------

1=	00:00:00:00:00:00	13=	00:00:00:00:00:00	25=	00:00:00:00:00:00
2=	00:00:00:00:00:00	14=	00:00:00:00:00:00	26=	00:00:00:00:00:00
3=	00:00:00:00:00:00	15=	00:00:00:00:00:00	27=	00:00:00:00:00:00
4=	00:00:00:00:00:00	16=	00:00:00:00:00:00	28=	00:00:00:00:00:00
5=	00:00:00:00:00:00	17=	00:00:00:00:00:00	29=	00:00:00:00:00:00
6=	00:00:00:00:00:00	18=	00:00:00:00:00:00	30=	00:00:00:00:00:00
7=	00:00:00:00:00:00	19=	00:00:00:00:00:00	31=	00:00:00:00:00:00
8=	00:00:00:00:00:00	20=	00:00:00:00:00:00	32=	00:00:00:00:00:00
9=	00:00:00:00:00:00	21=	00:00:00:00:00:00
10=	00:00:00:00:00:00	22=	00:00:00:00:00:00
11=	00:00:00:00:00:00	23=	00:00:00:00:00:00
12=	00:00:00:00:00:00	24=	00:00:00:00:00:00

------------------------------------------------------------------------------

Enter here to CONFIRM or ESC to CANCEL:

Figure 19-10 Menu 3.5.1 WLAN MAC Address Filter

The following table describes the fields in this menu.

	Table 19-5 Menu 3.5.1 WLAN MAC Address Filter
FIELD	DESCRIPTION
Active	To enable MAC address filtering, press [SPACE BAR] to select Yes and press [ENTER].
Filter Action	Define the filter action for the list of MAC addresses in the MAC address filter table.
	To deny access to the ZyAIR, press [SPACE BAR] to select Deny Association and press
	[ENTER]. MAC addresses not listed will be allowed to access the router.
	The default action, Allowed Association, permits association with the ZyAIR. MAC
	addresses not listed will be denied access to the router.

MAC Address Filter

1..32 Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers that are allowed or denied access to the ZyAIR in these address fields.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

19-10 LAN Setup