ZyXEL Communications Wireless Gateway Series Log Commands, Chart O-5Sys log, Chart O-6Log Categories and Available Settings

ZyAIR Wireless Gateway Series User’s Guide

	Chart O-5 Sys log
LOG MESSAGE	DESCRIPTION
Mon dd hr:mm:ss hostname	This message is sent by the "RAS" when this syslog is
src="<srcIP:srcPort>"	generated. The messages and notes are defined in this
dst="<dstIP:dstPort>"	appendix’s other charts.
msg="<msg>" note="<note>"

Log Commands

Go to the command interpreter interface (the Command Interpreter Appendix explains how to access and use the commands).

Configuring What You Want the ZyAIR to Log

Use the sys logs load command to load the log setting buffer that allows you to configure which logs the ZyAIR is to record.

Use sys logs category followed by a log category and a parameter to decide what to record.

Chart O-6 Log Categories and Available Settings

LOG CATEGORIES	AVAILABLE PARAMETERS
error	0, 1, 2, 3
mten	0, 1
upnp	0, 1
8021x	0, 1
urlforward	0, 1
urlblocked	0, 1, 2, 3
javablocked	0, 1, 2, 3

Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to record only alerts for that category, and 3 to record both logs and alerts for that category.

Use the sys logs save command to store the settings in the ZyAIR (you must do this in order to record logs).

O-4 Log Descriptions