ZyXEL Communications Wireless Gateway Series Step, Step, Step, Step, Type, Step, Start IP, Start IP, One-to-One, Edit Action, Select Rule, Figure 23-15Menu 15.1.1.1 Address Mapping Rule

ZyAIR Wireless Gateway Series User’s Guide

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Addr= N/A

Network Address Translation= Full Feature

Metric= 1

Private= N/A

RIP Direction= None

Version= N/A

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

Figure 23-14 Menu 11.3 Remote Node Network Layer Options

Step 2. Then enter 15 from the main menu.

Step 3. Enter 1 to configure the Address Mapping Sets.

Step 4. Enter 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action and then enter 1 for the Select Rule field. Press [ENTER] to confirm.

Step 5. Select Type as One-to-One(direct mapping for packets going both ways), and enter the local Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP as 10.132.50.1 (our first IGA). The following figure shows how to configure the first rule.

Menu 15.1.1.1 Address Mapping Rule

Type= One-to-One

Local IP:

Start= 192.168.1.10

End = N/A

Global IP:

Start= 10.132.50.1

End = N/A

Press ENTER to Confirm or ESC to Cancel:

Figure 23-15 Menu 15.1.1.1 Address Mapping Rule

Step 6. Repeat the previous step for rules 2 to 4 as outlined above.

NAT 23-13