ZyXEL Communications Wireless Gateway Series PPTP, PPPoE, Main Menu, Encapsulation, Table 31-1Menu 26.1 Schedule Set Setup

ZyAIR Wireless Gateway Series User’s Guide

Table 31-1 Menu 26.1 Schedule Set Setup

FIELD	DESCRIPTION	EXAMPLE
Once:
Date	If you selected Once in the How Often field above, then enter the date	2000-01-01
	the set should activate here in year-month-date format.
Weekday:
Day	If you selected Weekly in the How Often field above, then select the
	day(s) when the set should activate (and recur) by going to that day(s)
	and pressing [SPACE BAR] to select Yes, then press [ENTER].
Start Time	Enter the start time when you wish the schedule set to take effect in	09:00
	hour-minute format.
Duration	Enter the maximum length of time this connection is allowed in hour-	08:00
	minute format.
Action	Forced On means that the connection is maintained whether or not	Forced On
	there is a demand call on the line and will persist for the time period
	specified in the Duration field.
	Forced Down means that the connection is blocked whether or not
	there is a demand call on the line.
	Enable Dial-On-Demandmeans that this schedule permits a demand
	call on the line. Disable Dial-On-Demandmeans that this schedule
	prevents a demand call on the line.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11 from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or PPTP in the Encapsulation field and then press [ENTER] to make the schedule sets field available as shown next.

Call Scheduling 31-3