ZyXEL Communications Wireless Gateway Series 31.1 Introduction, Call Scheduling, Menu 26 – Schedule Setup, Menu 11.1 – Remote Node Profile, Figure 31-1Menu 26 Schedule Setup

ZyAIR Wireless Gateway Series User’s Guide

Chapter 31

Call Scheduling

Call scheduling (applicable for PPPoE or PPTP encapsulation only) allows you to dictate when a remote node should be called and for how long.

31.1 Introduction

The call scheduling feature allows the ZyAIR to manage a remote node and dictate when a remote node should be called and for how long. This feature is similar to the scheduler in a video cassette recorder (you can specify a time period for the VCR to record). You can apply up to 4 schedule sets in Menu 11.1 – Remote Node Profile. From the main menu, enter 26 to access Menu 26 – Schedule Setup as shown next.

	Menu 26 - Schedule Setup
Schedule	Name	Schedule	Name
Set #		Set #
------	-----------------	------	-----------------
1	_______________	7	_______________
2	_______________	8	_______________
3	_______________	9	_______________
4	_______________	10	_______________
5	_______________	11	_______________
6	_______________	12	_______________

Enter Schedule Set Number to Configure= 0

Edit Name= N/A

Press ENTER to Confirm or ESC to Cancel:

Figure 31-1 Menu 26 Schedule Setup

Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling conflicts. For example, if sets 1, 2, 3 and 4 in are applied in the remote node then set 1 will take precedence over set 2, 3 and 4 as the ZyAIR, by default, applies the lowest numbered set first. Set 2 will take precedence over set 3 and 4, and so on.

You can design up to 12 schedule sets but you can only apply up to four schedule sets for a remote node.

Call Scheduling 31-1