ZyXEL Communications Wireless Gateway Series Menu 15.3 — Trigger Port Setup, Table 23-6Menu 15.3 Trigger Port Setup, Figure 23-21Menu 15.3 Trigger Port Setup, Two Points To Remember About Trigger Ports

ZyAIR Wireless Gateway Series User’s Guide

2.Port 7070 is a “trigger” port and causes the ZyAIR to record Jane’s computer IP address. The ZyAIR associates Jane's computer IP address with the "incoming" port range of 6970-7170.

3.The Real Audio server responds using a port number ranging between 6970-7170.

4.The ZyAIR forwards the traffic to Jane’s computer IP address.

5.Only Jane can connect to the Real Audio server until the connection is closed or times out. The ZyAIR times out in three minutes with UDP (User Datagram Protocol) or two hours with TCP/IP (Transfer Control Protocol/Internet Protocol).

Two Points To Remember About Trigger Ports

1.Trigger events only happen on outgoing data (from the ZyAIR to the WAN).

2.Only one LAN computer can use a trigger port (range) at a time.

Enter 3 in menu 15 to display Menu 15.3 — Trigger Port Setup, shown next.

		Menu 15.3	- Trigger Port Setup
Rule	Name		Incoming	Trigger
		Start Port End Port		Start Port End Port

----------------------------------------------------------------------

1.	0	0	0	0
2.	0	0	0	0
3.	0	0	0	0
4.	0	0	0	0
5.	0	0	0	0
6.	0	0	0	0
7.	0	0	0	0
8.	0	0	0	0
9.	0	0	0	0
10.	0	0	0	0
11.	0	0	0	0
12.	0	0	0	0

Press ENTER to Confirm or ESC to Cancel:

Figure 23-21 Menu 15.3 Trigger Port Setup

The table below describes the fields for configuration in this menu.

Table 23-6 Menu 15.3 Trigger Port Setup

FIELD	DESCRIPTION	EXAMPLE
Rule	This is the rule index number.	1
Name	Enter a unique name for identification purposes. You may enter up to 15	Real Audio
	characters in this field. All characters are permitted - including spaces.

NAT 23-17