ZyXEL Communications ZyWALL 300 manual 392

Chapter 27 Application Patrol

Table 114 Application Edit (continued)

LABEL	DESCRIPTION
#	This field is a sequential value, and it is not associated with a specific condition.

	Note: The ZyWALL checks conditions in the order they appear in
	the list. While this sequence does not affect the functionality,
	you might improve the performance of the ZyWALL by putting
	more common conditions at the top of the list.
Port	This field displays the specific port number to which this policy applies.
Schedule	This is the schedule that defines when the policy applies. any means the policy is
	active at all times if enabled.
User	This is the user name or user group to which the policy applies. If any displays, the
	policy applies to all users.
From	This is the source zone of the traffic to which this policy applies.
To	This is the destination zone of the traffic to which this policy applies.
Source	This is the source address or address group for whom this policy applies. If any
	displays, the policy is effective for every source.
Destination	This is the destination address or address group for whom this policy applies. If any
	displays, the policy is effective for every destination.
Access	This field displays what the ZyWALL does with packets for this application that
	match this policy.
	forward - the ZyWALL routes the packets for this application.
	Drop - the ZyWALL does not route the packets for this application and does not
	notify the client of its decision.
	Reject - the ZyWALL does not route the packets for this application and notifies the
	client of its decision.
BWM	These fields show the amount of bandwidth the application’s traffic that matches
	the policy can use. These fields only apply when Access is set to forward.
	In - This is how much inbound bandwidth, in kilobits per second, this policy allows
	the application to use. Inbound refers to the traffic the ZyWALL sends to a
	connection’s initiator. If no displays here, this policy does not apply bandwidth
	management for the application’s incoming traffic.
	Out - This is how much outbound bandwidth, in kilobits per second, this policy
	allows the application to use. Outbound refers to the traffic the ZyWALL sends out
	from a connection’s initiator. If no displays here, this policy does not apply
	bandwidth management for the application’s outgoing traffic.
	Pri - This is the priority for this application’s traffic that matches this policy. The
	smaller the number, the higher the priority. The traffic of an application with higher
	priority is given bandwidth before traffic of an application with lower priority. The
	ZyWALL ignores this number if the incoming and outgoing limits are both set to 0.
	In this case the traffic is automatically treated as being set to the lowest priority (7)
	regardless of this field’s configuration.
Log	This field shows whether the ZyWALL generates a log (log), a log and alert (log
	alert) or neither (no) when the application’s traffic matches this policy.

392
	ZyWALL USG 300 User’s Guide