Chapter 44 Service Control

The following table describes the labels in this screen.

Table 209 System > Telnet

LABEL

DESCRIPTION

Enable

Select the check box to allow or disallow the computer with the IP address that

 

matches the IP address(es) in the Service Control table to access the ZyWALL

 

CLI using this service.

 

 

Server Port

You may change the server port number for a service if needed, however you must

 

use the same port number in order to access the ZyWALL using the service.

 

 

Service Control

This specifies from which computers you can access which ZyWALL zones.

 

 

#

This the index number of the service control rule.

 

 

Zone

This is the zone on the ZyWALL the user is allowed or denied to access.

 

 

Address

This is the object name of the IP address(es) with which the computer is allowed or

 

denied to access.

 

 

Action

This displays whether the computer with the IP address specified above can access

 

the ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).

 

 

Add icon

Click the Add icon in the heading row to open a screen where you can add a new

 

rule. Refer to Table 207 on page 592 for information on the fields.

 

Click the Edit icon to go to the screen where you can edit the rule.

 

Click the Add icon in an entry to add a rule below the current entry.

 

Click the Delete icon to remove an existing rule. A window display asking you to

 

confirm that you want to delete the rule. Note that subsequent rules move up by one

 

when you take this action.

 

Click the Move to N icon to display a field to type a number for where you want to

 

put that rule and press [ENTER] to move the rule to the number that you typed.

 

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

44.9 Configuring FTP

You can upload and download the ZyWALL’s firmware and configuration files using FTP. To use this feature, your computer must have an FTP client. Please see Chapter 45 on page 615 for more information about firmware and configuration files.

To change your ZyWALL’s FTP settings, click System > FTP tab. The screen appears as shown. Use this screen to specify from which zones FTP can be used to access the ZyWALL. You can also specify from which IP addresses the access can come.

 

605

ZyWALL USG 300 User’s Guide