ZyXEL Communications ZyWALL 300 manual 591

	Chapter 44 Service Control
Table 206 System > WWW (continued)
LABEL	DESCRIPTION
Admin/User	Admin Service Control specifies from which zones an administrator can use
Service Control	HTTPS to manage the ZyWALL (using the web configurator). You can also specify
	the IP addresses from which the administrators can manage the ZyWALL.
	User Service Control specifies from which zones a user can use HTTPS to log into
	the ZyWALL (to log into SSL VPN for example). You can also specify the IP
	addresses from which the users can access the ZyWALL.
#	This the index number of the service control rule.
Zone	This is the zone on the ZyWALL the user is allowed or denied to access.
Address	This is the object name of the IP address(es) with which the computer is allowed or
	denied to access.
Action	This displays whether the computer with the IP address specified above can access
	the ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).
Add icon	Click the Add icon in the heading row to open a screen where you can add a new
	rule. Refer to Table 207 on page 592 for information on the fields.
	Click the Edit icon to go to the screen where you can edit the rule.
	Click the Add icon in an entry to add a rule below the current entry.
	Click the Delete icon to remove an existing rule. A window display asking you to
	confirm that you want to delete the rule. Note that subsequent rules move up by one
	when you take this action.
	Click the Move to N icon to display a field to type a number for where you want to
	put that rule and press [ENTER] to move the rule to the number that you typed.
HTTP
Enable	Select the check box to allow or disallow the computer with the IP address that
	matches the IP address(es) in the Service Control table to access the ZyWALL
	web configurator using HTTP connections.
Server Port	You may change the server port number for a service if needed, however you must
	use the same port number in order to use that service to access the ZyWALL.
Admin/User	Admin Service Control specifies from which zones an administrator can use HTTP
Service Control	to manage the ZyWALL (using the web configurator). You can also specify the IP
	addresses from which the administrators can manage the ZyWALL.
	User Service Control specifies from which zones a user can use HTTP to log into
	the ZyWALL (to log into SSL VPN for example). You can also specify the IP
	addresses from which the users can access the ZyWALL.
#	This the index number of the service control rule.
Zone	This is the zone on the ZyWALL the user is allowed or denied to access.
Address	This is the object name of the IP address(es) with which the computer is allowed or
	denied to access.
Action	This displays whether the computer with the IP address specified above can access
	the ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).
Add icon	Click the Add icon in the heading row to open a screen where you can add a new
	rule. Refer to Table 207 on page 592 for information on the fields.
	Click the Edit icon to go to the screen where you can edit the rule.
	Click the Add icon in an entry to add a rule below the current entry.
	Click the Delete icon to remove an existing rule. A window display asking you to
	confirm that you want to delete the rule. Note that subsequent rules move up by one
	when you take this action.
	Click the Move to N icon to display a field to type a number for where you want to
	put that rule and press [ENTER] to move the rule to the number that you typed.
Authentication

	591
ZyWALL USG 300 User’s Guide