Appendix B Log Descriptions

 

Table 251 Routing Protocol Logs (continued)

 

LOG MESSAGE

DESCRIPTION

 

 

Invalid OSPF virtual-

Virtual-link %s authentication has been set to same-as-area but the

 

 

link %s authentication

area has invalid authentication configuration. %s: Virtual-Link ID

 

 

of area %s.

 

 

 

Invalid OSPF md5

Invalid OSPF md5 authentication is set on interface %s. %s: Interface

 

 

authentication on

Name

 

 

interface %s.

 

 

 

Invalid OSPF text

Invalid OSPF text authentication is set on interface %s. %s: Interface

 

 

authentication on

Name

 

 

interface %s.

 

 

 

Interface %s does not

Interface %s has been set OSPF authentication same-as-area,

 

 

belong to any OSPF

however the interface does not belong to any OSPF area. %s:

 

 

area.

Interface Name

 

 

Invalid OSPF

Interface %s has been set OSPF authentication same-as-area,

 

 

authentication of area

however the area has invalid text authentication configuration. %s:

 

 

%s on interface %s.

Interface Name

 

 

Table 252 NAT Logs

 

 

 

LOG MESSAGE

DESCRIPTION

 

 

The NAT range is full

The NAT mapping table is full.

 

 

%s FTP ALG has

The FTP Application Layer Gateway (ALG) has been turned on or off.

 

 

succeeded.

%s: Enable or Disable

 

 

Extra signal port of

Extra FTP ALG port has been changed.

 

 

FTP ALG has been

 

 

 

modified.

 

 

 

Signal port of FTP ALG

Default FTP ALG port has been changed.

 

 

has been modified.

 

 

 

%s H.323 ALG has

The H.323 ALG has been turned on or off. %s: Enable or Disable

 

 

succeeded.

 

 

 

Extra signal port of

Extra H.323 ALG port has been changed.

 

 

H.323 ALG has been

 

 

 

modified.

 

 

 

Signal port of H.323

Default H.323 ALG port has been changed.

 

 

ALG has been modified.

 

 

 

%s SIP ALG has

The SIP ALG has been turned on or off. %s: Enable or Disable

 

 

succeeded.

 

 

 

Extra signal port of

Extra SIP ALG port has been changed.

 

 

SIP ALG has been

 

 

 

modified.

 

 

 

Signal port of SIP ALG

Default SIP ALG port has been changed.

 

 

has been modified.

 

 

 

Register SIP ALG extra

SIP ALG apply additional signal port failed.

 

 

port=%d failed.

%d: Port number

 

 

Register SIP ALG

SIP ALG apply signal port failed.

 

 

signal port=%d failed.

%d: Port number

 

 

693

ZyWALL USG 300 User’s Guide