ZyXEL Communications ZyWALL 300 manual 612

Chapter 44 Service Control

The following table describes the labels in this screen.

Table 214 System > Vantage CNM

LABEL	DESCRIPTION
Enable	Select this check box to allow Vantage CNM to manage your ZyWALL.
Server IP Address/	Enter the IP address or fully qualified domain name of the Vantage server.
FQDN	If the Vantage CNM server is on a different subnet to the ZyWALL and is
	behind a NAT router, enter the WAN IP address of the NAT router here and
	configure the NAT router to forward UDP port 11864 traffic to the Vantage
	CNM server.
	If the Vantage CNM server is behind a firewall, you may have to create a rule
	on the firewall to allow UDP port 11864 traffic through to the Vantage CNM
	server (most (new) ZyXEL firewalls automatically allow this).
Transfer Protocol	Select whether the Vantage CNM sessions should use regular HTTP
	connections or secure HTTPS connections.
	Note: HTTPS is recommended.
	The Vantage CNM server must use the same setting.
Device Management	Select Auto to have the ZyWALL allow Vantage CNM sessions to connect to
IP	any of the ZyWALL’s IP addresses.
	Select Custom to specify the ZyWALL’s IP address that allows Vantage CNM
	sessions. Configure the Custom IP field if you select this. You might for
	example need to specify the IP address when using a WAN trunk that uses
	multiple WAN IP addresses.
Custom IP	Specify the ZyWALL’s IP address that allows Vantage CNM sessions. This
	field applies when you select Custom in the Device Management IP field.
Keepalive Interval	Set how often the ZyWALL sends a keep alive packet to the Vantage CNM
	server if there is no other traffic. The keep alive packets maintain the Vantage
	CNM server’s control session.
Periodic Inform	Select this option to have the ZyWALL periodically send “Inform” messages to
Interval	the Vantage CNM server.
HTTPS Authentication	When you are using HTTPs, select this option to have the ZyWALL
	authenticate the Vantage CNM server’s certificate. In order to do this you
	need to import the Vantage CNM server’s public key (certificate) into the
	ZyWALL’s trusted certificates.
Vantage Certificate	Select the Vantage CNM server’s certificate. This applies when you enable
	HTTPS authentication.
Advanced/Basic	Click Advanced to display more configuration fields or click Basic to display
	fewer fields.
Apply	Click Apply to save your changes back to the ZyWALL.
Reset	Click Reset to begin configuring this screen afresh.

612
	ZyWALL USG 300 User’s Guide