Chapter 4 Wizard Setup
4.8.1 VPN Express Wizard - Policy SettingThe Policy Setting specifies which devices can use the VPN tunnel. Local and remote IP addresses must be static.
Local Policy (IP/Mask): Type the IP address of a computer on your network. You can also specify a subnet. This must match the remote IP address configured on the peer IPSec device.
Remote Policy (IP/Mask): Type the IP address of a computer behind the peer IPSec device. You can also specify a subnet. This must match the local IP address configured on the peer IPSec device.
Figure 36 VPN Express Wizard: Step 4
The following table describes the labels in this screen.
Table 17 VPN Express Wizard: Step 4
LABEL | DESCRIPTION |
Summary |
|
|
|
Name | This is the name of the VPN connection (and VPN gateway). |
|
|
Secure | This is the WAN IP address or domain name of the remote IPSec router. If this field |
Gateway | displays 0.0.0.0, only the remote IPSec router can initiate the VPN connection. |
|
|
This is a | |
Key | negotiation. |
|
|
Local Policy | This is a (static) IP address and Subnet Mask on the LAN behind your ZyWALL. |
|
|
Remote | This is a (static) IP address and Subnet Mask on the network behind the remote |
Policy | IPSec router. |
|
|
| 99 |
ZyWALL USG 300 User’s Guide | |
|
|