Chapter 35 Addresses

The following table describes the labels in this screen.

Table 166 Object > Address > Address > Edit

LABEL

DESCRIPTION

Name

Type the name used to refer to the address. You may use 1-31 alphanumeric

 

characters, underscores(_), or dashes (-), but the first character cannot be a

 

number. This value is case-sensitive.

Address Type

Select the type of address you want to create. Choices are: HOST, RANGE, and

 

SUBNET.

 

 

IP Address

This field is only available if the Address Type is HOST. This field cannot be blank.

 

Enter the IP address that this address object represents.

 

 

Starting IP

This field is only available if the Address Type is RANGE. This field cannot be

Address

blank. Enter the beginning of the range of IP addresses that this address object

 

represents.

 

 

Ending IP

This field is only available if the Address Type is RANGE. This field cannot be

Address

blank. Enter the end of the range of IP address that this address object represents.

 

 

Network

This field is only available if the Address Type is SUBNET, in which case this field

 

cannot be blank. Enter the IP address of the network that this address object

 

represents.

 

 

Netmask

This field is only available if the Address Type is SUBNET, in which case this field

 

cannot be blank. Enter the subnet mask of the network that this address object

 

represents. Use dotted decimal format.

 

 

OK

Click OK to save your changes.

 

 

Cancel

Click Cancel to exit this screen without saving your changes.

 

 

35.3 Address Group Screens

Use the Address Group summary screen and the Address Group Add/Edit screen, to maintain address groups in the ZyWALL.

35.3.1 Address Group Summary

The Address Group screen provides a summary of all address groups. To access this screen, click Object > Address > Address Group.

Figure 380 Object > Address > Address Group

 

517

ZyWALL USG 300 User’s Guide