Husqvarna 15V2 manual Safety Instructions, General use

Page 7

SAFETY INSTRUCTIONS

Safety instructions

These instructions are for your safety. Read them carefully.

WARNING!

The inserted symbol means that important safety instructions need to be observed. It applies to your safety.

General use

Read all the instructions in this operator’s manual and on the machine before you start it. Ensure you understand them and then observe them.

Learn how to use the machine and its controls safely and learn to how to stop quickly. Also learn to recognize the safety decals.

Only allow the machine to be used by adults who are familiar with its use.

Make sure nobody else is in the vicinity of the machine when you start the engine, engage the drive or drive off.

Make sure animals and people maintain a safe distance from the machine.

Stop the machine if any one enters the working area.

Clear the area of objects such as stones, toys, wires, etc. that may become caught in the blades and be thrown out.

Look out for the ejector and do not direct it towards anyone.

Stop the engine and prevent the engine from being started until you have cleaned the cutting unit or outlet channel.

Remember the operator is responsible for danger or accidents.

Never carry passengers. The machine is only intended to be used by one person.

Always look downwards and backwards before and while reversing. Keep watch for both large and small obstacles.

Slow before cornering.

Switch off the blades when you are not mowing.

Read the operator’s manual before starting the machine.

Clear the area of objects before mowing.

Never carry passengers.

WARNING!

This machine can sever hands and feet as well as throw objects. Failure to observe the safety instructions can result in serious injuries.

English – 5

Image 7
Contents English RiderSvenska Contents Towing IntroductionDear customer Travel and transport on public roadsSerial number Good serviceExplanation of Symbols General use Safety InstructionsKeep children away from the area to be mowed Proceed as follows Driving on slopesChildren MaintenanceDo not smoke when carrying out maintenance Transport Presentation PresentationLocation of the controls Parking brake Throttle controlChoke lever Speed limiterLift lever for cutting unit Cutting unitSeat Lever for adjustment of cutting heightFuelling Before starting DrivingStarting the engine Driving Driving the machine Cutting tips Release lever Stopping the engineHours Before start 100 200 MaintenanceMaintenance schedule Daily Maintenance intervalRight-hand fender Removing the machine hoodsEngine hood Front hoodAdjusting the brake Checking and adjustment of the steering wiresPoorly adjusted brakes can result in reduced braking power Checking and adjusting the choke wire Checking and adjustment of the throttle wireReplacing the fuel filter Varning Replacing the air filterChecking of the fuel pump’s air filter Check the level of the battery acidFitting the wrong spark plug type can damage the engine Inspecting the safety system Checking the tyre pressure Main fuseChecking the engine’s cooling air intake Observe caution to avoid trapping your hand Fitting the cutting unitRemoving the cutting unit Installing BioClipChecking and adjusting the cutting unit’s ground pressure Replacing the cutting unit belt Adjusting the parallelism of the cutting unitBelt replacement on BioClip Checking the cutting unit’s parallelismBelt change on Combi Maintenance Placing in service position Service position for the cutting unitMaintenance Restoring from service position Checking the blades Removal of BioClip plug Combi Replacing the break-pin BioClip 90, CombiChecking the engine’s oil level LubricationChanging the oil filter Changing the oilChecking the transmission’s oil level Lubricating the belt adjusterGeneral lubrication Problem Procedure Trouble Shooting ScheduleCover ServiceStorage Winter storageTechnical Data EU declaration of conformity Only applies to Europe Pre-delivery service Service JournalWork done Work done Date, mileage, stamp, sign ´z+H-¶6-¨ English 114 01