Husqvarna CARB III manual Fueling, Fuel safety, Transport and storage, Long-term storage

Page 21

FUEL HANDLING

Fueling

WARNING! Taking the following

!precautions, will lessen the risk of fire:

Do not smoke and do not place any hot objects in the vicinity of fuel.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean the area around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter must be replaced at least once a year. Contamination in the tanks causes malfunction. Make sure the fuel is well mixed by shaking the container before refuelling.The capacities of the chain oil tank and fuel tank are carefully matched. You should therefore always fill the chain oil tank and fuel tank at the same time.

WARNING! Fuel and fuel vapor are highly ! flammable. Take care when handling fuel

and chain oil. Be aware of the risks of fire, explosion and those associated with inhalation.

Fuel safety

•Never refuel the machine while the engine is running.

•Make sure there is plenty of ventilation when refuelling or mixing fuel (gasoline and 2-stroke oil).

•Move the machine at least 10 ft (3 m) from the refuelling point before starting it.

•Never start the machine:

1If you have spilled fuel or chain oil on the machine. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

WARNING! Never use a machine with ! visible damage to the spark plug guard

and ignition cable. A risk of sparking arises, which can cause a fire.

Transport and storage

•Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked flames from electrical equipment, electric motors, relays/switches, boilers and the like.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local gas station.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The bar guard must always be fitted to the cutting attachment when the machine is being transported or in storage, in order to prevent accident contact with the sharp chain. Even a non-moving chain can cause serious cuts to yourself or persons you bump into with an exposed chain.

•Remove the spark plug cap from the spark plug. Activate the chain brake.

Long-term storage

Empty the fuel/oil tanks in a well ventilated area. Store the fuel in approved cans in a safe place. Fit the bar guard. Clean the machine. See instructions under the heading Maintenance schedule.

115 13 80-96 Rev.3 2008-12-17

English – 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 435 435e 440e KEY to Symbols Symbols on the machineSymbols in the operator’s manual EPA You will find the following labels on your chain sawContents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsAlways use common sense Machine′s safety equipmentPersonal protective equipment Chain brake and front hand guardGeneral Safety Precautions Throttle lockout Chain catcherRight hand guard Cutting equipment Stop switchVibration damping system MufflerCutting equipment designed to reduce kickback General rulesBar ChainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingTensioning the chain 435e, 440e 435Which could lead to serious, even fatal injuries Chain oil Lubricating cutting equipmentFilling with chain oil Checking chain lubricationChain drive sprocket Needle bearing lubricationChecking wear on cutting equipment Fitting the bar and chain Assembly435 435e, 440eAssembly Fuel Fuel HandlingFueling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingStarting Cold engineStopping Working Techniques Basic safety rulesBefore use General working instructionsGeneral rules Terms Basic cutting techniqueLimbing Tree felling techniqueLog is supported at one end. There is a high risk Safe distanceFelling direction Clearing the trunk and preparing your retreatDirectional cuts Felling cut How to avoid kickback What is kickback?Freeing a tree that has fallen badly Cutting the trunk into logs Maintenance Carburetor adjustmentGeneral Immediately Checking the inertia brake releaseMuffler Starter Replacing the starter cordTensioning the recoil spring Air filter Replacing the return and drive springsFitting the starter Lubricating the bar tip sprocket Spark plugNeedle bearing lubrication Cooling systemAir Injection centrifugal cleaning Temperature -5C 23F or colderWinter use Daily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinationsYour Warranty Rights and Obligations Emission Warranty Parts List Safety precautions for chain saw users American Standard Safety PrecautionsKickback safety precautions Other safety precautionsAclaracion DE LOS Simbolos Símbolos en la máquinaSímbolos en el manual de instrucciones Etiquetas que se encuentran en la motosierra Indice ÍndicePrecauciones de seguridad para usuarios de Apreciado cliente Introduccion¿Qué es qué en la motosierra? ¿QUE ES QUE?Instrucciones Generales DE Seguridad Medidas a tomar antes de utilizar una motosierra nuevaImportante Equipo de protección personal Emplee siempre el sentido comúnEquipo de seguridad de la máquina Freno de cadena con protección contra reculadas«TIRAR Hacia Atrás Para REINICIAR» Fiador del acelerador Captor de cadenaProtección de la mano derecha Sistema amortiguador de vibraciones Equipo de corteBotón de parada SilenciadorEquipo de corte reductor de reculadas Reglas básicasEspada CadenaGeneralidades sobre el afilado de los dientes cortantes Tensado de la cadena Afilado de dientes cortantesGeneralidades sobre el ajuste de la profundidad de corte 435 Lubricación del equipo de corte Repostaje de aceite para cadena de motosierraControl de la lubricación de la cadena Lubricación del cojinete de agujas Piñón de arrastre de la cadenaControl del desgaste del equipo de corte ¡ATENCION! La mayoría de losMontaje de la espada y la cadena Montaje¡ATENCION! Para manipular la cadena Deben utilizarse guantes protectoresMontaje del apoyo de corteza Carburante Manipulacion DEL CombustibleSeguridad en el uso del combustible RepostajeTransporte y almacenamiento Almacenamiento prolongadoArranque y parada Arranque Y ParadaArranque ¡ATENCION! Antes de arrancar, observe Lo siguienteParada Antes de utilizar la máquina Tecnica DE TrabajoInstrucciones generales de trabajo Reglas básicas de seguridadReglas básicas Designaciones Técnica básica de corteTécnica de tala DesramadoDistancia de seguridad Dirección de derribo Corte de ramas bajas y camino de retiradaCorte de indicación Corte de derribo Medidas preventivas de las reculadas Tratamiento de una tala fallida¿Qué es la reculada? Tronzado del tronco Mantenimiento GeneralidadesAjuste del carburador Detenerse inmediatamente Control de la función de inerciaSilenciador Mecanismo de arranque Cambio del cordón de arranqueTensado del muelle de retorno Filtro de aire Cambio del muelle de retorno y el muelle de arrastreMontaje del mecanismo de arranque Engrase del cabezal de rueda de la espada BujíaLubricación del cojinete de agujas Sistema refrigeranteDepuración centrífuga Air Injection Utilización en inviernoTemperaturas de -5C 23F o inferiores Programa de mantenimiento Datos técnicos Datos TecnicosAfilado y calibres de afilado de la cadena de sierra Combinaciones de espada y cadenaSUS Derechos Y Obligaciones DE Garantia Lista DE Piezas DE LA Garantía DE Emisiones Precauciones de seguridad para usuarios de motosierras Precauciones DE Seguridad DE LA Norma AmericanaPrecauciones de seguridad en reculadas Otras precauciones de seguridad115 13 80-96 Rev.3 115 13 80-96 Rev.3 ´z+SF¶6¢¨ ´z+SF¶6¢¨ 115 13 80-96 Rev.3 1151380-96
Top Page Image Contents