TROUBLESHOOTING
| PROBLEM |
| POSSIBLE CAUSE |
| SOLUTION | |
|
|
|
|
|
|
|
Lines will not advance when | 1. | Lines are welded to themselves. | 1. | Lubricate with silicone spray. | ||
using the Auto Feed Head: | 2. | Not enough string on spool. | 2. | Install more line. Refer to Line Replacement | ||
|
|
|
|
| earlier in this manual. | |
|
| 3. | Lines are worn too short. | 3. | Pull both lines while pressing button. | |
|
| 4. | Lines are tangled on spool. | 4. | Remove lines from spool and rewind. Refer to | |
|
|
|
|
| Line Replacement earlier in this manual. | |
|
|
|
|
|
|
|
Grass wraps around driveshaft | 1. | Cutting tall grass at ground level. | 1. | Cut tall grass from the top down to prevent | ||
housing and string head: |
|
|
| wrapping. | ||
|
|
|
|
| ||
Motor fails to start when | 1. | Power cord is not plugged in or | 1. | Plug in the power cord. | ||
switch trigger is depressed. |
| connection is loose. |
|
|
| |
|
| 2. | Household circuit breaker is | 2. | Check circuit breaker. | |
|
|
| tripped. |
|
|
|
|
|
|
|
|
|
|
| CALL |
|
CALL US FIRST
For any questions about operating or maintaining your product,
call the Homelite® Help Line!
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.