Eton G3 owner manual Tuning in Stations, Direct Frequency Entry, AUTO-SEARCH Tuning

Page 7

GLOBE TRAVELER G3 OWNER’S MANUAL

GLOBE TRAVELER G3 OWNER’S MANUAL

TUNING IN STATIONS

Turn on the G3. Stations are tuned with the Buttons, Tuning- Knob, Direct Frequency Entry and Auto-Search. Quick, short, sequential

presses of the buttons enables tuning up or down frequency. Alternately, the TUNING knob can be used. Continuous tuning in shortwave can only be done with the tuning knob and via direct frequency entry.

DIRECT FREQUENCY ENTRY

Turn on the G3. Use this method when the desired frequency of a radio station is known. AM, LW, SW and Air Band frequencies are entered in kilohertz (KHz), e.g. 810 KHz or 9475 KHz.; FM frequencies are entered in megahertz (MHz), e.g. 102.9 MHz, ignoring the decimal point. NOTE: Aircraft frequencies are entered in Kilohertz (120100 KHz), but are normally given in Magahertz (120.1 MHz).

1.Use the numeric buttons to enter the frequency.

2.Within 3 seconds, press the AM button if it’s an AM, LW or SW frequency, or the FM button for FM and Air Band frequencies.

AUTO-SEARCH TUNING

With the G3 on, auto-search tuning starts by pressing either the up

or down frequency button for about 2 seconds. The G3 has 3 selectable auto-search modes: STOP, ATS or DELAY-5. The factory programmed default mode is STOP. These are described below. When auto searching shortwave stations, place the bandwidth switch into the WIDE position. Auto search is not recommended for SSB signals. STOP: Auto-searching stops on the next encountered station. DELAY-5:Auto-searching stops for 5 seconds on each next encountered station, then moves on.

AUTO-SEARCH TUNING continued

ATS: (Auto Tuning Storage): Auto-searching automatically stores the strongest FM local stations into memories starting with page 99 and counting downward until all are stored, e.g. 98, 97, 96, etc. Tune to the FM band and perform auto-search. After the ATS scan, select your

memory with the buttons and the station with the F1-7 buttons. If too many memories are filled with static, try the scan again with the DX/LOCAL switch set in the LOCAL position (down).

To select an auto-search mode:

1.With the radio turned off, hold down the F6 button for about 2 seconds, then release. Note that the last chosen mode flashes in the screen.

2.While the mode flashes, perform quick, short presses of the F6 button to select alternate modes.

3.Press PAGE/TIME button.

STORING STATIONS INTO MEMORY

The G3 has 700 memories (also called presets), arranged in 100 pages, with each page holding 7 memories. Buttons F1-7 represent memory locations.

Note that when storing into an already occupied memory position, its contents will be replaced with your new entry.

1.Turn on the G3.

2.Tune to the desired station.

3.Press the PAGE/TIME button to place the G3 into PAGE/MEMO mode (PAGE/MEMO is on the left side of the display).

4.Select the desired memory page with the buttons.

5.Store the frequency by pressing one of buttons F1-7 for about 2 seconds. Note that a flashing box appears around the selected memory location.

6.When finished storing stations, press the PAGE/TIME button to store your stations and exit MEMO mode.

12

13

 

 

Image 7
Contents Globe Traveler G3 Disposal EnvironmentUsing the Sleep Timer FeaturesWHAT’S INCLUDED? Power Sources Preventing Battery LeakageVolume Control F1-7 Dual Function Button DiagramInitial Settings Setting UP AM and FM Outside North AmericaShortwave Listening Signal Strength IndicatorSelecting LW, AM, FM, Aircraft Band and Shortwave FM RDSWIDE/NARROW Switch Tuning SSB Single Side BandUsing the DX/LOCAL Switch Using the Synchronous DetectorDirect Frequency Entry Tuning in StationsAUTO-SEARCH Tuning AUTO-SEARCH TuningLabeling Memory Pages Accessing Stored MemoriesUsing the COPY/PASTE Function Deleting ALL of a Memory PAGE’S ContentsSetting Alarms 1 Through Deleting the Contents of ALL Memory PagesSetting Your Time Zone Setting the Clock and WeekdayFM STEREO/MONO Selection Activating and Deactivating the AlarmsUsing the Light External Antenna SocketWarranty Registration Reset ButtonUsing the Lock Feature Resetting the RadioService for Your Product Environnement AVEZ-VOUS Besoin D’AIDE?Prévenir DES Fuites DE Pile FonctionnalitesQU’EST-CE QUI EST FOURNI? Sources D’ALIMENTATIONParamétrage Initial Utilisation DE LA Minuterie DE SommeilF1-7 Schéma DU Bouton DE Double Fonctions Chargement DES Batteries AU Ni-MH Dans LE G3RDS FM Configuration AM ET FM EN Dehors DE L’AMÉRIQUE DU NordContrôle DU Volume Sélection DES Bandes GO, AM, FM Aviation ET OCDES Ondes Courtes continué Indicateur DE Force DU SignalEcoute DES Ondes Courtes Optimisation DE LA RéceptionCommutateur WIDE/NARROW Syntonisation BLU Bande latérale uniqueUtilisation DU Commutateur DX/LOCAL Utilisation DU Détecteur SynchroneRecherche Automatique continué Entrée Directe DE LA FréquenceSyntonisation Avec Recherche Automatique Syntonisation AvecUtilisation DE LA Fonction Accès AUX Mémoires EnregistréesDénomination DES Pages Mémoires Utilisation DE LA Fonction COPIER/COLLERRéglage DE L’HORLOGE ET DU Jour DE LA Effacement DE Tout CE QU’UNE Memoire ContientEffacement DU Contenu DE Toutes LES Pages Memoires Réglage DE Votre Fuseau HoraireJour DE LA continué Régage DES Alarmes DE 1 ÀRégage DES Alarmes DE 1 À 4 continué Réglage DE L’HORLOGE ET DUSupport Pliable À L’ARRIÈRE Prise D’ANTENNE ExterneSélection FM STÉREO/MONO Prise Ecouteurs ET UtilisationEnregistrement DE LA Garantie Garantie Limitée Maintenance DE Votre ProduitPar courrier avec la carte de garantie ci-jointe Medio ambiente ¿NECESITA AYUDA?Prevención DE Fuga DE Batería Características¿QUÉ SE INCLUYE? Fuentes DE AlimentaciónCarga DE Baterías NI-MH EN EL G3 Diagrama DE Botones DE Doble Función F1-7Configuración DE AM Y FM Fuera DE Norteamérica USO DEL Temporizador DE SueñoIndicador DE Fuerza DE Señal Control DE VolumenEscucha DE Onda Corta Sintonización DE SSB Banda Lateral Única Optimización DE Recepción DE Onda CortaUSO DEL Interruptor DE DX/LOCAL Entrada DE Frecuencia Directa USO DEL Detector SincrónicoInterruptor DE WIDE/NARROW Sintonización DE EmisorasEtiquetado DE Páginas DE Memoria Sintonización DE Autobúsqueda continuadoAlmacenaje DE Emisoras EN LA Memoria Acceso a Memorias AlmacenadasAjuste DE SU Huso Horario Ajuste DE RelojBorrado DE UNA Memoria Seleccionada Borrado DE LOS Contenidos DE Todas LAS Páginas DE MemoriaLista de Abreviaciones de Husos Horarios Ajuste DE Alarmas DE LA 1 a LAAjuste DE SU Huso Horario continuado Ajuste DEL Reloj Y DE Días LaborablesSelección DE FM ESTÉREO/MONO Activación Y Desactivación DE LAS AlarmasUSO DE LA LUZ Enchufe DE Antena ExternoRegistro DE LA Garantía Botón DE ResetReseteo DE LA Radio USO DE LA Función DE BloqueoServicio DE Reparación DE SU Producto Grundig Radio Line By
Related manuals
Manual 57 pages 17.8 Kb

G3 specifications

The Eton G3 is a versatile and compact portable radio receiver designed for outdoor enthusiasts and emergency preparedness. Known for its robust performance and user-friendly features, the G3 has won the hearts of many radio enthusiasts looking for a reliable way to stay informed and entertained.

One of the standout features of the Eton G3 is its ability to receive a wide range of frequencies. It covers AM, FM, as well as shortwave bands, allowing users to tune into local stations, international broadcasters, or even emergency service communications. The built-in digital signal processing technology provides clear reception, reducing static and improving sound quality, making it an excellent choice for both casual listening and serious radio aficionados.

The G3 is equipped with a backlit LCD display that provides essential information at a glance, including frequency, time, and mode settings. This display is easy to read in various lighting conditions, which is particularly useful when camping or in low light environments.

Portability is a key characteristic of the Eton G3. Weighing less than a pound and featuring a slim design, it easily fits into a backpack or even a pocket. The included collapsible antenna enhances reception and can be retracted when not in use, further contributing to its compact nature.

Another important aspect of the G3 is its power versatility. Users can operate the radio using four AA batteries, making it ideal for extended outdoor use where charging options are limited. Additionally, the G3 can be powered via an AC adapter, offering flexibility for both home and travel use.

For added convenience, the Eton G3 comes with built-in alarm and sleep timer functions, making it suitable for overnight camping trips or as a bedside companion. Its durable construction ensures it can withstand the rigors of outdoor activities, while its sleek aesthetics make it a stylish addition to any indoor space.

In conclusion, the Eton G3 is a highly functional, portable radio that combines advanced technology with user-friendly features. With its broad frequency coverage, digital processing, and compact design, it serves as an essential tool for anyone looking to stay connected to the world, whether in the comfort of home or out in nature.