OPERATION
3.ALWAYS point gun in a safe direction and squeeze spray gun trigger to release retained high water pressure.
WARNING
The high pressure stream of water that this equipment produces can pierce skin and its underlying tissues, leading to serious injury and possible amputation.
Spray gun traps high water pressure, even when engine is stopped and water is disconnected, which can cause injury.
•Keep high pressure hose connected to pump and spray gun while system is pressurized.
•ALWAYS point gun in safe direction and squeeze spray gun trigger, to release high pressure, every time you stop engine. Engage trigger lock when not in use.
IMPORTANT: Spray gun traps high water pressure, even when engine is stopped and water is disconnected.
4.Engage safety latch on spray gun when not in use.
How to Use Accessory Tray
The unit is equipped with an accessory tray with places to store your spray gun and nozzle extension.There is also a hook at the front of the accessory tray to hold your high pressure hose.
NOTE: The extra hole in the tray is for storing a utility brush.The extra clip in the tray is for storing a turbo nozzle.The brush and turbo nozzle are NOT included with your pressure washer.You can buy these items as optional accessories.
1.Place nozzle extension through hole on accessory tray, as shown in Figure 15.
Figure 15 — Typical Accessory Tray
2.Place spray gun through hole on accessory tray on right side of unit (Figure 15).
NOTE: You may also use the hooks attached to the handle to store your gun and nozzle extension, as shown on page 6.
3.Hang high pressure hose on hook attached to accessory tray on front of tray, as shown in Figure 15.
How to Use Spray Tips
The
Figure 16 — Spray Tip Spray Patterns
Low Pressure
Black
Use to apply
detergent
High Pressure
40° White |
| 15° Yellow |
| 0° Red |
Follow these instructions to change spray tips:
1.Engage safety latch on spray gun.
CAUTION
A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.
•NEVER exchange spray tips without locking the safety latch on the trigger.
2.Pull back collar on
12