Husqvarna ST 268EP To use choke control E, Bedienung des choke E, Usar el mando del cebador E

Page 22

OFF

FULL

To use choke control (E)

The choke control is located on the engine. Use the choke control whenever you are starting a cold engine. Do not use to start a warm engine.

•To engage choke, turn knob counterclockwise to “FULL”. Slowly turn knob clockwise to disengage.

Bedienung des choke (E)

Der Choke befindet sich auf dem Motor. Verwenden Sie den Choke nur dann, wenn der Motor kalt ist. Verwenden Sie ihn nie zum Anlassen des schon war- men Motors.

•Um den Choke einzuschalten, drehen Sie den im Uhrzeigersinn auf Position “FULL”. Drehen Sie den Knopf langsam entgegen dem Bedienungsknopf Uhrzeigersinn, um den Choke auszuschalten.

Pour utiliser la commande d’étrangleur (E)

La commande d’étrangleur est située sur le moteur. Utilisez la commande d’étrangleur toutes les fois que vous mettez en marche un moteur froid. Ne l’utilisez pas pour mettre en marche un moteur chaud.

•Pour embrayer la commande d’étrangleur, tournez le bouton dans le sens contraire des aiguilles de l’horloge à “FULL”. Tournez lentement le bouton dans le sens des aiguilles de l’horloge pour désembrayer.

Usar el mando del cebador (E)

El mando del cebador está en el motor. Utilizar el mando del cebador siempre que se arranque con motor frío. No utilizar para poner en marcha un motor caliente.

•Para conectar el cebador, girar el mando en el sentido inverso al de las agujas del reloj sobre “FULL”. Para desconectar, girar el mando poco a poco en el sentido de las agujas del reloj.

Hoe de chokeregeling (E) te gebruiken

De chokeregeling is bevestigd aan de motor. Gebruik de chokeregeling als u een koude motor wilt starten. Gebruik de chokeregeling niet om een warme motor te starten.

•Om de choke in te schakelen, dient u de knop langzaam tegen de klok mee naar “FULL” te draaien. Draai de knop met de klok in om uit te schakelen.

Uso del comando dell’arricchitore di avviamento (E)

Il comando dell’arricchitore di avviamento si trova sul motore. Va utilizzato ogniqualvolta si accende un motore a freddo. Non utilizzarlo mai per far partire il motore a caldo.

•Per inserire l’arricchitore di avviamento, girare la manopola in senso con- trario su “FULL”. Per disinserire il comando, girare lentamente la manopola in senso orario.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents ST 268EP Contents Indice Sichere Bedienung einer Schnee fräse Instructions BedienungWartung und Lagerung PréparationFormación FonctionnementEntretien et rangement PreparaciónInstructies FuncionamientoMantenimiento y Conservación VoorbereidingPreparazione Onderhoud en OpslagAddestramento FunzionamentoManutenzione e conservazione ST 268EP Enlever la souffleuse de la caisse en carton Remove snow thrower from the cartonEntnehmen der Schneefräse aus dem Karton Sacar la máquina quitanieves del cartónZusammensetzen der Schneefräse How to set up your snow throwerComment installer votre souffleuse Como preparar su máquina quita- nievesMontar la biela del control de velocidad Het installeren van de staaf van de snelhe- idsregelingAbrir la empuñadura superior Het uitpakken van de bovenste hendelMontar la biela del mando de tracción Install traction drive control rodInstallation des fahrantriebssteuerhebels Montaggio della barra di regolazione della trazioneInstallez la tige de contrôle de la vis sans fin Install auger control rodInstallation des Steuerhebels für die einzugssch- necken Het installeren van de regelstang van de boorregelingInstall discharge chute / chute rotater head Het installeren van de afvoertrechter / rotorkopInstall chute deflector remote control Montar el mando a distancia del deflector del conductoVérifiez la pression des pneus Check tire pressureÜberprüfen des reifendrucks Controlar la presión de los neumáticosYUB L G K a CH OWerkzeugkasten Comment Utiliser Votre Souffleuse HOW to USE Your Snow ThrowerBedienung DER SCHNEE- Fräse Como Utilizar SU Máquina QUIT- AnievesBenutzung des benzin-absperrventils F Pour utiliser la commande des gaz CTo use fuel shut-off valve F Pour utiliser le carburant fermez le robinet FBedienung des choke E Pour utiliser la commande d’étrangleur ETo use choke control E Usar el mando del cebador ERegelung des schneeauswurfs To control snow dischargePour contrôler la décharge de la neige Het bedienen van de sneeuwuitstoot Controlar la eyección de la nieveRegolare la bocca di scarico della neve Das schneefräsen Using the clean-out toolTo throw snow Pour lancer de la neigeDe ontstopper gebruiken Utilisation de l’outil de nettoyageUsar la herramienta para la limpieza Utilizzo dello strumento di pulituraPoursedéplacerversl’avantetversl’arrière To move forward and backwardVorwärts und rückwärts fahren Moverse adelante y atrásVoorwaarts en achterwaarts bewegen Per spostarsi in avanti o all’indietroOpération de servodirection Power steering operationBetrieb mit servolenkung Funcionamiento de la direcciónEinstellen der gleitkufen N To adjust skid plates NScraper bar P Schaber PHet afstellen van de remplaten N Regular las placas de deslizamiento NBarra de arrastre P Schraperstang PVOR DEM Motorstart R FBefore Starting the Engine Avant DE Mettre LE Moteur EN MarcheVoordat U DE Motor Start Antes DE Poner EN Marcha EL MotorPrima DI Riavviare IL Motore If recoil starter has frozen To start engineBefore stopping Motor anlassenPour mettre le moteur en marche Vor dem ausschaltenWenn der anreißstarter eingefroren ist Avant l’arrêtSi el arrancador de retroceso se ha congelado Puesta en marcha del motorAntes de parar De motor startenAls de terugloopstarter is bevroren Voordat u stoptAvviare il motore Conseils Pour LE Soufflage DE LA Neige Snow Throwing TipsHinweise FÜR DAS Schneefräsen Prima dell’arrestoConsigli PER Spazzare LA Neve Consejos Para Lanzar LA NieveTips Voor HET Sneeuwruimen Percorsi successivi e movendosi lentamenteService aantekeningen Service RecordSchema dentretien WartungsnachweisDati di servizio Tandwielcarter van de boor Sistema de tracciónRiemen Aandrijfsysteem met trekkabelEngine MotorMoteur Motore Limpieza CleaningReinigung SchoonmaakSneeuwruimer SouffleuseMáquina Quitanieves SpazzaneveShear bolts ScherbolzenVis de cisaillement Pernos de seguridadSchuifbouten Perni di sicurezzaPour enlever le couvercle de la courroie To remove belt coverEntfernen der riemenabdeckung Het verwijderen van de riemhulsInstall Belt Cover and two 2 screws. Tighten securely Erneuern der riemenSustituir las correas Pour remplacer les courroiesBringen SIE DIE Riemenscheibe Wieder AN Het vervangen van de riemen Sostituire le cinghie Pour enlever les roues To remove wheelsEntfernen der räder Desmontar las ruedasDe kabelspanning instellen To adjust cable tensionAjustement de la tension du câble Per regolare la tensione del cavoVergaser CarburetorEngine speed MotorgeschwindigkeitLagerung StorageOther SonstigesDivers EntreposageSouffleuse AlmacenajeImmagazzinaggio OpslagOverig AltroTroubleshooting StörungssucheSolución de problemas Recherche des causes d’une panneProbleemoplosser HET Probleem DE Oorzaak DE OplossingPage Page Page 532 42 85-68 07.06.09 TH

ST 268EP specifications

The Husqvarna ST 268EP is a versatile and powerful snow blower designed for homeowners and professionals alike, offering exceptional performance in tackling heavy snowfall and maintaining clear pathways. This machine combines cutting-edge technology with robust construction to deliver reliability and efficiency during winter tasks.

One of the standout features of the ST 268EP is its powerful engine. Equipped with a reliable 269cc Husqvarna engine, it provides ample power to clear large amounts of snow quickly and effortlessly. The engine is not only designed for optimal performance but also incorporates advanced air injection technology, which ensures a steady airflow for flawless engine operation, even in the coldest conditions.

The ST 268EP offers a 26-inch clearing width and a 23-inch intake height, making it capable of handling both light and heavy snowfalls. The auger system features a robust design that efficiently handles varied snow types, including wet or heavy snow. Additionally, the machine's high-performance impeller allows for impressive throwing distance, helping to clear snow piles effectively from your driveway or walkway.

One of the innovative technologies integrated into the Husqvarna ST 268EP is the two-stage snow throwing system. This system works by first collecting snow through the auger and then discharging it through the chute, which is adjustable to direct snow in the desired direction. The chute can rotate 200 degrees, offering superior control over where the snow is thrown, which is particularly useful in confined spaces.

User convenience is a key consideration in the design of the ST 268EP. The snow blower features electric start capability, making it easy to start with the push of a button, eliminating the hassle of pull cords, especially in frigid temperatures. Ergonomically designed handles provide comfort during operation, while the hand warmers keep the operator's hands warm during extended use.

With its durable construction, including heavy-duty steel and a reinforced housing, the Husqvarna ST 268EP is built to withstand rigorous winter conditions. The adjustable skid shoes allow users to customize the clearance height, preventing damage to surfaces while ensuring efficient snow removal.

In summary, the Husqvarna ST 268EP is a powerful, efficient, and user-friendly snow blower equipped with advanced features and reliable technology. Its durable build, combined with innovative systems, makes it an ideal choice for anyone looking to manage winter snowfall effectively. Whether for residential or commercial use, the ST 268EP proves to be a valuable asset during the winter season.
Top Page Image Contents