Table 21. System Menu (continued)
Feature | Choices |
Peripherals | <Enter> |
|
|
BIOS | <Enter> |
|
|
Description
Provides the port connectors for onboard designators. None of these can be modified in user mode
Port | On Board | Port | On Board |
Connector | Designator | Connector | Designator |
J44 | COM 1 | J7 | ATA100 |
J28 | COM 2 |
| Secondary IDE |
|
| ||
J101 | LPT 1 | J10 | Floppy |
J46 | PS/2 Keyboard | J42 | VGA Conn |
J46 | PS/2 Mouse | J107 | LAN 1 |
J4 | Primary IDE | J108 | LAN 2 |
J5 | Secondary IDE | J43 | USB1 & USB2 |
J6 | ATA100 |
| & USB3 |
|
| ||
| Primary IDE | J11 | USB 4 |
|
|
ROM SIZE: 1024 KB
Vendor: Phoenix Technologies LTD
Version: 1.14
Release Date: 2/22/2002 – creation date
Exit Menu
To access this menu, select Exit on the menu bar at the top of the screen.
| Main | Advanced | Security | Power | Boot | System |
|
|
|
|
|
|
|
|
|
Exit
Table 22 lists the options available in the Exit menu. Select an option using the up or down arrow keys; then press <Enter> to execute the option. Pressing <Esc> does not exit this menu. You must select one of the items from the menu or menu bar to exit.
Table 22. Exit Menu
Choices
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Load Custom Default
Save Custom Default
Description
Exits after writing all modified Setup item values to CMOS.
Exits leaving CMOS unmodified. User is prompted if any of the setup fields were modified.
Loads default values for all Setup items.
Reads previous values of all Setup items from CMOS.
Writes all Setup item values to CMOS.
Loads custom default values for all setup items.
Saves all Setup item values to NVRAM as a custom default.
Configuration Software and Utilities | 41 |