Intel SE7500CW2 manual Configuring Chassis Standoffs

Configuring Chassis Standoffs

If your chassis does not have standoffs placed as shown below, you must rearrange them so they match the holes in the server board. Failure to properly rearrange the metal standoffs may cause the server board to malfunction and may permanently damage it. Your chassis may be different from the illustration.

For the Intel® Server Chassis SC5200:

1.Chassis comes with positions 1, 4, 6, 20, 23, and 26 preinstalled.

2.Install standoffs in the remaining positions (7, 18, 19, P, and S). Standoffs are included with your chassis.

1	7		20
	P		P
	P		P
	P		P
4	P	18	P
			23
	S
6		19	26

OM14221

Figure 6. Configuring Chassis Standoffs

52 Intel Server Board SE7500CW2 Product Guide