Intel SE7500CW2 manual Problems with Application Software, Bootable CD-ROM Is Not Detected

Page 82

θTry reseating the add-in adapter.

The add-in adapter stopped working without apparent cause.

θTry reseating the adapter first; then try a different slot if necessary.

θThe network driver files may be corrupt or deleted. Delete and then reinstall the drivers.

θRun the diagnostics.

PCI Installation Tips

Some common PCI tips are listed here.

θCertain drivers may require interrupts that are not shared with other PCI drivers. For certain drivers, it may be necessary to alter settings so that interrupts are not shared.

Problems with Application Software

If you have problems with application software, do the following:

θVerify that the software is properly configured for the system. See the software installation and operation documentation for instructions on setting up and using the software.

θTry a different copy of the software to see if the problem is with the copy you are using.

θMake sure all cables are installed correctly.

θVerify that the server board jumpers are set correctly. See Chapter 5.

θIf other software runs correctly on the system, contact your vendor about the failing software. If the problem persists, contact the software vendor’s customer service representative for help.

Bootable CD-ROM Is Not Detected

Check the following:

θIs the BIOS configured to allow the CD-ROM to be the first bootable device?

82	Intel Server Board SE7500CW2 Product Guide

Image 82

Contents Intel Server Board SE7500CW2 Product Guide Disclaimer Contents Solving Problems UpgradingRegulatory and Integration Information Technical ReferenceIndex Tables Feature Server Board FeaturesServer Board Features DescriptionSystem I/O Power Security Form Factor Back Panel Connectors Back Panel ConnectorsServer Board Connector and Component Locations Server Board Connector and Component LocationsDual Processor Operation ProcessorBoxed Processor Fan Heat sink Intel E7500 Chipset MCHSerial Ports Keyboard and Mouse ConnectorsSuper I/O Parallel PortMemory PCI I/O SubsystemBit / 133 MHz PCI-X Capable Subsystem Bit / 100 MHz PCI-X Capable SubsystemNetwork Interface Controller NIC Video Controller32-bit/33 MHz PCI Subsystem AC Link Mode Wake on LANSecurity Password ProtectionSecurity Operation Summary Password Clear Jumper Using PasswordsIntel Server Board SE7500CW2 Product Guide Configuration Utilities Configuration Software and UtilitiesPower-On Self-Test Post Description and brief procedureStarting Setup Using Bios Setup UtilityIf You Cannot Access Setup Setup MenusKeyboard Commands PressOn-Screen Options Power Boot SystemMenu Selection Bar Menu Selection Bar Main Advanced SecurityMain Menu 44 MB, 3 ½ defaultMain Menu ChoicesPrimary/Secondary, Master/Slave Submenus Disabled defaultEnabled default Description Primary/Secondary, Master/Slave SubmenuAdvanced Menu Win2000/.NET DefaultAdvanced Menu Auto Detect default Disabled default No defaultDOS default Enabled defaultDevice Configuration Submenu O Device Configuration SubmenuIRQ7 default ECP default DefaultDMA 3 default On Board Device Submenu On Board Device SubmenuPCI Configuration Submenu PCI Configuration SubmenuServer Menu Submenu Choices Enabled defaultChoices Disabled default Option ROM Scan SubmenuConsole Redirection Submenu Console Redirection SubmenuEvent Logging Submenu Enabled default No defaultEvent Logging Submenu Hardware Monitor Submenu Hardware Monitor SubmenuSecurity Menu If no password entered previously FeatureEnabled default User default Security MenuPower Menu Power MenuBoot Menu Last State defaultBoot Priority Boot MenuDevice System Menu Feature ChoicesSystem Menu Exit Menu Port On Board Connector DesignatorExit Menu Recording the Current Bios Settings Upgrading the BiosPreparing for the Upgrade Obtaining the Upgrade UtilityRecovering the Bios Upgrading the BiosCreating the Bios Upgrade Diskette Changing the Bios Language Monitored Headers and Sensors Hardware MonitoringSensor Type Intel Server Board SE7500CW2 Product Guide Tools and Supplies Needed Server Board InstallationSafety Cautions Before You BeginSafety and Regulatory Compliance Minimum Hardware Requirements Installation NotesPower Supply ProcessorInstalling the I/O Gasket and Shield Installation ProceduresAttaching the Gasket to the I/O Shield Installing the I/O Shield Attaching the Label to the I/O ShieldConfiguring Chassis Standoffs Configuring Chassis StandoffsInstalling Rubber Bumpers Installing Rubber BumpersPlacing the Server Board into the Chassis Installing the Server BoardAttaching the Server Board Installing Memory Installing MemoryInstalling the Processors Installing the Retention BracketsAttaching the Processor Applying Thermal GreaseAttaching the Processor Wind Tunnel Assembly Installing the Processor Wind TunnelAttaching the Heat Sink Attaching the Heat Sink Fan Attaching Intake and Exhaust AssembliesInstalling the Optional Scsi Add-in Card Making Connections to the Server Board Making Connections to the Server BoardCable Routing IDE CablesFloppy Drive Cable Routing the Floppy Drive CableFinishing Up Making Back Panel ConnectionsUpgrading Installing DIMMs MemoryProcessors Adding or Replacing a Processor Attaching the Processor Installing the Processor Wind Tunnel OM14477 Replacing the Backup Battery Removing a ProcessorVarning Intel Server Board SE7500CW2 Product Guide Checklist Solving ProblemsResetting the System Initial System StartupRunning New Application Software After the System Has Been Running CorrectlyPreparing the System for Diagnostic Testing More Problem Solving ProceduresMonitoring Post Verifying Proper Operation of Key System Lights Specific Problems and Corrective ActionsPower Light Does Not Light Confirming Loading of the Operating SystemNo Characters Appear on Screen Characters Are Distorted or IncorrectSystem Cooling Fans Do Not Rotate Properly Diskette Drive Activity Light Does Not LightCD-ROM Drive Activity Light Does Not Light Problems with NetworkHard Disk Drive Activity Light Does Not Light Cannot Connect to a ServerBootable CD-ROM Is Not Detected Problems with Application SoftwarePCI Installation Tips Getting Help World Wide Web TelephoneIntel Server Board SE7500CW2 Product Guide Technical Reference Configuration JumpersPins What happens at system reset Jumper NameFront Panel Header Connection Descriptions Pins DescriptionFront Panel Header LocationProduct Regulatory Compliance Product Safety ComplianceRegulatory and Integration Information Product EMC ComplianceProduct Regulatory Compliance Markings Electromagnetic Compatibility NoticesProduct Certification Markings Europe CE Declaration of Conformity Taiwan Declaration of ConformityKorean RRL Compliance Australia / New ZealandIndex ESDPCI

Related manuals

Manual 17 pages 57.58 Kb