Attaching the Label to the I/O Shield
1.Remove the backing from the label included with your server board.
2.Press the label onto the outside face of the I/O shield. See Figure 4, A.
USB 1 2 3 
MOUSE KYBD
PA |
|
RA | LLEL |
|
A 
10 | NET | |
| /100 | MB |
|
| |
OM14360
Figure 4. Attaching the Label to the I/O Shield
Installing the I/O Shield
1. Position one edge so that the dotted groove is outside the chassis wall, and the lip of the shield rests on the inner chassis wall.
2. Hold the shield in place, and push it into the opening until it is seated. Make sure the I/O shield snaps into place all the way around.
1
2
OM14427
Figure 5. Installing the I/O Shield
Server Board Installation | 51 |