Minimum Hardware Requirements
To avoid integration difficulties and possible board damage, your system must meet the following minimum requirements. For a list of qualified memory and chassis components see:
http://support.intel.com/support/motherboards/server/SE7500CW2
Processor
Minimum of one 1.8 GHz Intel Xeon processor with 512K cache support. For a complete list of supported processors, see:
http://support.intel.com/support/motherboards/server/SE7500CW2
Memory
Minimum of two 128 MB Registered, ECC, DDR 200/266 compliant,
Power Supply
Minimum of 450W. Your supply must provide a minimum of 1.2 A of 5 V standby current or the board will not boot.
Installation Notes
Installation Process Quick Reference
Step
Remove the access cover
Install the I/O shield
Install memory
Install the standoffs
Install the rubber bumpers
Install the server board
Install the primary processor
Install the secondary processor (optional)
Connect cables to the server board
Where the information is located
Your chassis manual
This guide
This guide
This guide
This guide
This guide
This guide
This guide
This guide and your chassis manual
Server Board Installation | 49 |