Intel SE7500CW2 manual Changing the Bios Language

Page 44

1.Obtain the BIOS update file package from http://support.intel.com.

2.A file called “crisis.zip” is one of the files included with each Server Board SE7500CW2 BIOS release file package. Unzip the “crisis.zip” file to a directory on your hard drive.

3.Format a blank diskette (the diskette should not be a bootable DOS diskette). Insert the diskette into the diskette drive.

4.From the MS-DOS†prompt on an MS-DOS system, run the “crisdisk.bat” file from the directory you created on your hard drive. Follow the instructions on the screen to create the BIOS recovery diskette.

✏NOTE

The BIOS recovery diskette will not be created correctly under the MS-DOS window of a Windows operating system. It is necessary to use an MS-DOS system to create the BIOS recovery floppy diskette.

5.Power off the system, unplug the power cord, and remove the chassis panel.

6.Remove the spare jumper from pins 9-10 on jumper block J106 and install it on pins 1-2 (BIOS Recovery) of jumper block J106.

7.Insert the BIOS recovery diskette into the diskette drive.

8.Reinstall the chassis panel, plug in the power cord(s), and power on the system.

9.The screen will remain blank while the BIOS Recovery is performed. A number of beeps will occur during the BIOS update. The diskette drive access light will not turn off when the BIOS recovery is completed. Allow four minutes for the BIOS recovery to complete. If a POST card is installed in a PCI slot during the BIOS recovery, you can tell that the BIOS recovery is complete when code “EC” is displayed. When the BIOS Recovery is complete, it is safe to power off the system.

10.Power off the system, unplug the power cord(s), and remove the chassis panel.

11.Remove the BIOS Recovery jumper from pins 1-2 and store the jumper on pins 9-10.

12.Replace the chassis panel, plug in the power cord(s), and power on the system.

13.Perform a CMOS clear following the BIOS recovery.

Changing the BIOS Language

You can use the BIOS upgrade utility to change the language the BIOS uses for messages and the Setup program. Use a bootable diskette containing the Intel flash utility and language files.

1.Boot the computer with the bootable diskette in drive A. The BIOS upgrade utility screen appears.

2.Select Update Flash Memory From a File.

3.Select Update Language Set. Press <Enter>.

4.Select drive A and use the arrow keys to select the correct .lng file. Press <Enter>.

5.When the utility asks for confirmation that you want to flash the new language into memory, select Continue with Programming. Press <Enter>.

6.When the utility displays the message upgrade is complete, remove the diskette. Press <Enter>.

7.The computer will reboot and the changes will take effect.

44

Intel Server Board SE7500CW2 Product Guide

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Intel Server Board SE7500CW2 Product Guide Disclaimer Contents Solving Problems UpgradingIndex Technical ReferenceRegulatory and Integration Information Tables Server Board Features Server Board FeaturesFeature DescriptionSystem I/O Power Security Form Factor Back Panel Connectors Back Panel ConnectorsServer Board Connector and Component Locations Server Board Connector and Component LocationsBoxed Processor Fan Heat sink ProcessorDual Processor Operation Intel E7500 Chipset MCHKeyboard and Mouse Connectors Super I/OSerial Ports Parallel PortMemory PCI I/O SubsystemBit / 133 MHz PCI-X Capable Subsystem Bit / 100 MHz PCI-X Capable Subsystem32-bit/33 MHz PCI Subsystem Video ControllerNetwork Interface Controller NIC AC Link Mode Wake on LANSecurity Operation Summary Password ProtectionSecurity Password Clear Jumper Using PasswordsIntel Server Board SE7500CW2 Product Guide Configuration Software and Utilities Power-On Self-Test PostConfiguration Utilities Description and brief procedureUsing Bios Setup Utility If You Cannot Access SetupStarting Setup Setup MenusKeyboard Commands PressPower Boot System Menu Selection BarOn-Screen Options Menu Selection Bar Main Advanced Security44 MB, 3 ½ default Main MenuMain Menu ChoicesDisabled default Enabled default DescriptionPrimary/Secondary, Master/Slave Submenus Primary/Secondary, Master/Slave SubmenuAdvanced Menu Win2000/.NET DefaultAdvanced Menu Disabled default No default DOS defaultAuto Detect default Enabled defaultDevice Configuration Submenu O Device Configuration SubmenuDMA 3 default ECP default DefaultIRQ7 default On Board Device Submenu On Board Device SubmenuPCI Configuration Submenu PCI Configuration SubmenuChoices Enabled default Choices Disabled defaultServer Menu Submenu Option ROM Scan SubmenuConsole Redirection Submenu Console Redirection SubmenuEvent Logging Submenu Enabled default No defaultEvent Logging Submenu Hardware Monitor Submenu Hardware Monitor SubmenuIf no password entered previously Feature Enabled default User defaultSecurity Menu Security MenuPower Menu Boot MenuPower Menu Last State defaultDevice Boot MenuBoot Priority System Menu Feature ChoicesSystem Menu Exit Menu Port On Board Connector DesignatorExit Menu Upgrading the Bios Preparing for the UpgradeRecording the Current Bios Settings Obtaining the Upgrade UtilityCreating the Bios Upgrade Diskette Upgrading the BiosRecovering the Bios Changing the Bios Language Sensor Type Hardware MonitoringMonitored Headers and Sensors Intel Server Board SE7500CW2 Product Guide Server Board Installation Safety CautionsTools and Supplies Needed Before You BeginSafety and Regulatory Compliance Installation Notes Power SupplyMinimum Hardware Requirements ProcessorAttaching the Gasket to the I/O Shield Installation ProceduresInstalling the I/O Gasket and Shield Installing the I/O Shield Attaching the Label to the I/O ShieldConfiguring Chassis Standoffs Configuring Chassis StandoffsInstalling Rubber Bumpers Installing Rubber BumpersAttaching the Server Board Installing the Server BoardPlacing the Server Board into the Chassis Installing Memory Installing MemoryInstalling the Processors Installing the Retention BracketsAttaching the Processor Applying Thermal GreaseAttaching the Heat Sink Installing the Processor Wind TunnelAttaching the Processor Wind Tunnel Assembly Attaching the Heat Sink Fan Attaching Intake and Exhaust AssembliesInstalling the Optional Scsi Add-in Card Making Connections to the Server Board Making Connections to the Server BoardCable Routing IDE CablesFloppy Drive Cable Routing the Floppy Drive CableFinishing Up Making Back Panel ConnectionsUpgrading Installing DIMMs MemoryProcessors Adding or Replacing a Processor Attaching the Processor Installing the Processor Wind Tunnel OM14477 Replacing the Backup Battery Removing a ProcessorVarning Intel Server Board SE7500CW2 Product Guide Solving Problems Resetting the SystemChecklist Initial System StartupRunning New Application Software After the System Has Been Running CorrectlyMonitoring Post More Problem Solving ProceduresPreparing the System for Diagnostic Testing Specific Problems and Corrective Actions Power Light Does Not LightVerifying Proper Operation of Key System Lights Confirming Loading of the Operating SystemNo Characters Appear on Screen Characters Are Distorted or IncorrectSystem Cooling Fans Do Not Rotate Properly Diskette Drive Activity Light Does Not LightProblems with Network Hard Disk Drive Activity Light Does Not LightCD-ROM Drive Activity Light Does Not Light Cannot Connect to a ServerPCI Installation Tips Problems with Application SoftwareBootable CD-ROM Is Not Detected Getting Help World Wide Web TelephoneIntel Server Board SE7500CW2 Product Guide Configuration Jumpers Pins What happens at system resetTechnical Reference Jumper NamePins Description Front Panel HeaderFront Panel Header Connection Descriptions LocationProduct Safety Compliance Regulatory and Integration InformationProduct Regulatory Compliance Product EMC ComplianceProduct Certification Markings Electromagnetic Compatibility NoticesProduct Regulatory Compliance Markings Europe CE Declaration of Conformity Taiwan Declaration of ConformityKorean RRL Compliance Australia / New ZealandIndex ESDPCI
Related manuals
Manual 17 pages 57.58 Kb
Top Page Image Contents