Intel SE7500CW2 manual Hardware Monitoring, Monitored Headers and Sensors, Sensor Type

Hardware Monitoring

The Server Board SE7500CW2 has an integrated Winbond Heceta† 836327HF chip that is responsible for hardware monitoring. Together, the Winbond Heceta chip and Intel® LANDesk® Client Manager (LDCM) 6.3 software provide basic server hardware monitoring that alerts a system administrator if a hardware problem occurs on an Intel Server Board SE7500CW2–based system. The Intel LDCM software is for use with Windows 2000 Server and Windows 2000 Advanced Server operating systems. Other operating systems supported by the Server Board SE7500CW2 such as NetWare 6.0 or Red Hat† Linux† will not be monitored with LDCM. Table 23 lists the monitored headers and sensors on the Server Board SE7500CW2.

Table 23. Monitored Headers and Sensors

Sensor Type

Voltage

Fan Speed

Item

CPU1/2

1.8V VCC3

VCC

+12 V

2.5V Vbat

5 VSB CPU1_FAN CPU2_FAN CHASSIS_FAN

Description

Monitors processor voltage (one CPU power plane)

Chipset

Monitors VCC3

Monitors VCC

Monitors +12 V

Monitors 2.5 V (for DIMM)

Battery pin voltage

Monitors 5 VSB (5 V stand-by)

Monitors primary processor fan speed

Monitors secondary processor fan speed

Monitors chassis fan speed through chassis fan header 3 only. (Total 4 chassis fans available)

Temperature CPU2 CPU1

CHASSIS

Monitors primary processor temperature

Monitors secondary processor temperature

Monitors chassis ambient temperature

Intel LDCM software and a white paper that provides more information on using Intel LDCM software are available on the Intel Server Board SE7500CW2 Resource CD and are also available for download at the following Web site:

http://www.support.intel.com/support/motherboards/server/SE7500CW2

✏NOTE

If any system sensors such as CPU1_FAN are not being monitored, please refer to the following Web site for updates:

http://www.support.intel.com/support/motherboards/server/SE7500CW2

Configuration Software and Utilities 45