Konica Minolta NC-6 user manual NetWare Server/Client except Ndps

Page 17

2

Getting Ready

NetWare Server/Client (except NDPS)

1Check that all of the accessories have been included in the package. (“3 Checking the Accessories”)

2Connect the network cable. (“4 Connecting the Network Cable”)

3Specify the settings that enable the copier to connect to the NetWare server. (“7 Connecting the Computer and Copier”)

4Set up the NetWare client so that it can print via the NetWare server. (“7 Connecting the Computer and Copier”)

NetWare Server/Client (NDPS)

1Check that all of the accessories have been included in the package. (“3 Checking the Accessories”)

2Connect the network cable. (“4 Connecting the Network Cable”)

3Specify the IP address, subnet mask, and default gateway settings. (“5 Assigning an IP Address”)

4Print the Configuration Page and check the settings. (“6 Printing the Configuration Page”)

Note

The Configuration Page cannot be printed for copiers that are not equipped with the fax function.

5Specify the settings that enable the copier to connect to the NetWare server. (“7 Connecting the Computer and Copier”)

6Set up the NetWare client so that it can print via the NetWare server. (“7 Connecting the Computer and Copier”)

2-10

NC-6

Image 17
Contents Network Interface Card NC-6 Contents Product Specifications Troubleshooting Setting Up the Network ConnectionsFor the U.S.A User InstructionsFor Canada For EuropeFor countries not subject to Class B regulations For countries subject to Class B regulationsWelcome About PageScope Light Trademark AcknowledgementsGetting Ready For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows Selecting the Network Print MethodLPR For Windows PORT9100 TCP/IP protocol Windows XP Controller supports the system environments described below Checking the Setup Procedures Install the printer driver IPP Printing NetWare Server/Client except Ndps Accessories Checking the AccessoriesChecking the Accessories Types of Cable That Can Be Used Connecting the Network CableConnecting the Network Cable Connecting the Network Cable Entering the IP Address From the Control Panel Assigning an IP AddressAssigning an IP Address Network SETTING?Use the 10-key pad Keys to enter the IP address Gateway Printing the Configuration Printing the Configuration Procedures Described in This Chapter Connecting the Computer and CopierWindows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows ME Setting Up the Network ConnectionsPage Connecting the Computer and Copier Click Next Click Finish Windows NT Installing the Microsoft TCP/IP Printing ServiceSetting Up the LPR Connection Page Windows 2000/ Windows XP Check the IPP Settings Using PageScope LightPage Setting Up NetWare 4.x/ 5.x/ 6 Print Server Mode Connecting a Copier to the NetWare ServerNDS Setting Up NetWare 4.x/ 5.x/ 6 Remote Printer ModeNC-6 Creating an Ndps Printer Agent Setting Up the Windows Computer for the NetWare Client Connecting the Computer and Copier What is PageScope Light? Using PageScope LightNC-6 System Requirements Accessing PageScope LightUsing PageScope Light About the Screen Layout About the File Download Function Logging In as an AdministratorUsing PageScope Light Appendix Product SpecificationsTroubleshooting Konica Minolta Business TECHNOLOGIES, INC