Konica Minolta NC-6 user manual Setting Up NetWare 4.x/ 5.x/ 6 Remote Printer Mode, Nds

Page 37

7

Connecting the Computer and Copier

7Select the connection settings, and check that the PServer you created is listed in the active connections section.

	NDS	Bindery
[Enable NetWare] [*]	Enable (Enabled if check box is selected.)

[Frame Type] [*]	Auto detect (Select the frame type suitable for your network
	environment.)

[Print Server Name]	Manually enter the name of the print server created in step 4.

[NDS Context Name]	The context name for the	No settings required
	Pserver

[Print Server Password]	(Only specify this setting if it is also set on the NetWare server.)

[Password Retype]	(Only specify this setting if it is also set on the NetWare server.)

[Preferred File Server]	No settings required	The file server name for the
		Pserver

[Preferred NDS Tree]	The tree name for Pserver	No settings required
	login

[Print Queue Scan Rate]	1 (Change as necessary.)
[*]

[Connection Mode]	Directory Services	Bindery

[Mode] [*]	PServer

* If changes are made to settings marked with “*”, turn the machine off, then on again.

Setting Up NetWare 4.x/ 5.x/ 6 Remote Printer Mode

1Log in with administrator privileges.

2Start up NWadmin.

3Select the print service system or category container, and then select “Print service quick setup” from the Tool menu.

4Enter settings into the Print server name, Printer name, Print queue name, and Volume name boxes, select Remote parallel, LPT1 under Type name, and then save the settings.

Note

Specify the users who can use the queue, printer options, number of queues, and password. Refer to the NetWare documentation for details.

7-10

NC-6

Image 37

Contents Network Interface Card NC-6 Contents Product Specifications Troubleshooting Setting Up the Network ConnectionsFor the U.S.A User InstructionsFor Canada For EuropeFor countries not subject to Class B regulations For countries subject to Class B regulationsWelcome About PageScope Light Trademark AcknowledgementsGetting Ready For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows Selecting the Network Print MethodLPR For Windows PORT9100 TCP/IP protocol Windows XP Controller supports the system environments described below Checking the Setup Procedures Install the printer driver IPP Printing NetWare Server/Client except Ndps Accessories Checking the AccessoriesChecking the Accessories Connecting the Network Cable Connecting the Network CableTypes of Cable That Can Be Used Connecting the Network Cable Entering the IP Address From the Control Panel Assigning an IP AddressAssigning an IP Address Network SETTING?Use the 10-key pad Keys to enter the IP address Gateway Printing the Configuration Printing the Configuration Procedures Described in This Chapter Connecting the Computer and CopierWindows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows ME Setting Up the Network ConnectionsPage Connecting the Computer and Copier Click Next Click Finish Setting Up the LPR Connection Installing the Microsoft TCP/IP Printing ServiceWindows NT Page Windows 2000/ Windows XP Check the IPP Settings Using PageScope LightPage Setting Up NetWare 4.x/ 5.x/ 6 Print Server Mode Connecting a Copier to the NetWare ServerNDS Setting Up NetWare 4.x/ 5.x/ 6 Remote Printer ModeNC-6 Creating an Ndps Printer Agent Setting Up the Windows Computer for the NetWare Client Connecting the Computer and Copier What is PageScope Light? Using PageScope LightNC-6 Using PageScope Light Accessing PageScope LightSystem Requirements About the Screen Layout About the File Download Function Logging In as an AdministratorUsing PageScope Light Appendix Product SpecificationsTroubleshooting Konica Minolta Business TECHNOLOGIES, INC