Konica Minolta NC-6 user manual

Page 33

6 When the Add Standard TCP/IP Printer Port Wizard appears, click [Next>].

NC-6

Standard TCP/IP Port, and then

Click the “Ports” tab, and then click [Add Port].

Click [Properties] to open the Properties dialog box.

Right-click the icon for the installed printer driver.

2

3

4

5 In the Printer Ports dialog box, select click [New Port].

Connecting the Computer and Copier

6 After the Add LPR Compatible Printer dialog box appears, enter the copier IP address in the Name or address of server providing lpd services box, and then click [OK].

Enter the name of the print queue in the Name of printer or print queue on that server box. (Example: print)

7 Follow the instructions that appear on the screen to complete the installation for an LPR-compatible printer.

Printing to Port 9100 Windows 2000/ Windows XP

Important

Before continuing to set up the network settings, check the following: Check that the computer is set up to use the TCP/IP protocol. Check that the copier is also set up to use the TCP/IP protocol. Check that the printer driver has been installed on the computer.

(For instructions on installing the GDI driver, refer to “GDI Printer Controller” in the manual provided with the copier. For instructions on installing the optional PCL driver, refer to “PCL Printer Controller” in the manual provided with the PCL printer controller.)

1 When using Windows 2000, click [Start] - [Settings] - [Printers] to open the “Printers” folder.

When using Windows XP, click [Start] - [Control Panel] - [Printers and Other Hardware] - [See a list of installed printers and fax printers.] to open the “Printers and Faxes” folder.

7

7.2.3

7-6

Image 33

Contents Network Interface Card NC-6 Contents Product Specifications Troubleshooting Setting Up the Network ConnectionsFor the U.S.A User InstructionsFor Canada For EuropeFor countries not subject to Class B regulations For countries subject to Class B regulationsWelcome About PageScope Light Trademark AcknowledgementsGetting Ready For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows Selecting the Network Print MethodLPR For Windows PORT9100 TCP/IP protocol Windows XP Controller supports the system environments described below Checking the Setup Procedures Install the printer driver IPP Printing NetWare Server/Client except Ndps Accessories Checking the AccessoriesChecking the Accessories Connecting the Network Cable Connecting the Network CableTypes of Cable That Can Be Used Connecting the Network Cable Entering the IP Address From the Control Panel Assigning an IP AddressAssigning an IP Address Network SETTING?Use the 10-key pad Keys to enter the IP address Gateway Printing the Configuration Printing the Configuration Procedures Described in This Chapter Connecting the Computer and CopierWindows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows ME Setting Up the Network ConnectionsPage Connecting the Computer and Copier Click Next Click Finish Installing the Microsoft TCP/IP Printing Service Setting Up the LPR ConnectionWindows NT Page Windows 2000/ Windows XP Check the IPP Settings Using PageScope LightPage Setting Up NetWare 4.x/ 5.x/ 6 Print Server Mode Connecting a Copier to the NetWare ServerNDS Setting Up NetWare 4.x/ 5.x/ 6 Remote Printer ModeNC-6 Creating an Ndps Printer Agent Setting Up the Windows Computer for the NetWare Client Connecting the Computer and Copier What is PageScope Light? Using PageScope LightNC-6 Accessing PageScope Light Using PageScope LightSystem Requirements About the Screen Layout About the File Download Function Logging In as an AdministratorUsing PageScope Light Appendix Product SpecificationsTroubleshooting Konica Minolta Business TECHNOLOGIES, INC