Konica Minolta NC-6 user manual Connecting the Network Cable, Types of Cable That Can Be Used

Page 20

Connecting the Network Cable

4 Connecting the Network Cable

Connect the network cable to the copier.

4

4.1Types of Cable That Can Be Used

Use a Category 5 or 5E network cable.

4.2Connecting the Network Cable

Insert the connectors on the network cable into the network ports.

1Insert the connector on one end of the network cable into the network port as shown in the illustration.

2Insert the connector on the other end of the network cable into an available port on the network hub.

LED1

About the LEDs

LED2

 

 

 

 

 

 

LED1 (LINK):

This LED lights up when the network cable is

 

connected correctly. If this LED is not lit, check

 

the connection again, even if the copier appears

 

to be connected correctly. If this LED is not lit

 

when both ends are connected correctly, the

 

network cable may be damaged.

LED2 (ACT):

This LED blinks when data is being transferred.

NC-6

4-1

Image 20
Contents Network Interface Card NC-6 Contents Setting Up the Network Connections Product Specifications TroubleshootingUser Instructions For the U.S.AFor Canada For EuropeFor countries subject to Class B regulations For countries not subject to Class B regulationsWelcome Trademark Acknowledgements About PageScope LightGetting Ready Selecting the Network Print Method For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ WindowsLPR For Windows PORT9100 TCP/IP protocol Windows XP Controller supports the system environments described below Checking the Setup Procedures Install the printer driver IPP Printing NetWare Server/Client except Ndps Checking the Accessories AccessoriesChecking the Accessories Types of Cable That Can Be Used Connecting the Network CableConnecting the Network Cable Connecting the Network Cable Assigning an IP Address Entering the IP Address From the Control PanelNetwork SETTING? Assigning an IP AddressUse the 10-key pad Keys to enter the IP address Gateway Printing the Configuration Printing the Configuration Connecting the Computer and Copier Procedures Described in This ChapterSetting Up the Network Connections Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows MEPage Connecting the Computer and Copier Click Next Click Finish Windows NT Installing the Microsoft TCP/IP Printing ServiceSetting Up the LPR Connection Page Check the IPP Settings Using PageScope Light Windows 2000/ Windows XPPage Connecting a Copier to the NetWare Server Setting Up NetWare 4.x/ 5.x/ 6 Print Server ModeSetting Up NetWare 4.x/ 5.x/ 6 Remote Printer Mode NDSNC-6 Creating an Ndps Printer Agent Setting Up the Windows Computer for the NetWare Client Connecting the Computer and Copier Using PageScope Light What is PageScope Light?NC-6 System Requirements Accessing PageScope LightUsing PageScope Light About the Screen Layout Logging In as an Administrator About the File Download FunctionUsing PageScope Light Product Specifications AppendixTroubleshooting Konica Minolta Business TECHNOLOGIES, INC