Konica Minolta NC-6 user manual Windows NT, Installing the Microsoft TCP/IP Printing Service

Page 32

Connecting the Computer and Copier

7

Windows NT 4.0

✎

Important

Before continuing to set up the network settings, check the following:

Check that the computer is set up to use the TCP/IP protocol.

Check that the copier is also set up to use the TCP/IP protocol.

Check that the printer driver has been installed on the computer.

(For instructions on installing the GDI driver, refer to “GDI Printer Controller” in the manual provided with the copier. For instructions on installing the optional PCL driver, refer to “PCL Printer Controller” in the manual provided with the PCL printer controller.)

Installing the Microsoft TCP/IP Printing Service

1Click [Start] - [Settings] - [Control Panel] to open the “Control Panel” folder.

2Double-click “Network”.

3Click the “Services” tab, click [Add], and then install the “Microsoft TCP/IP print service”.

Setting Up the LPR Connection

1Click [Start] - [Settings] - [Printers] to open the “Printers” folder.

2Right-click the icon for the installed printer driver.

3Click [Properties] to open the Properties dialog box.

4Click the “Ports” tab, and then click [Add Port].

5In the Printer Port dialog box, select LPR Port, and then click [New Port].

✎

Note

If “LPR Port” does not appear, install the Microsoft TCP/IP print service.

NC-6

7-5

Image 32

Contents Network Interface Card NC-6 Contents Setting Up the Network Connections Product Specifications TroubleshootingUser Instructions For the U.S.AFor Canada For EuropeFor countries subject to Class B regulations For countries not subject to Class B regulationsWelcome Trademark Acknowledgements About PageScope LightGetting Ready Selecting the Network Print Method For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ WindowsLPR For Windows PORT9100 TCP/IP protocol Windows XP Controller supports the system environments described below Checking the Setup Procedures Install the printer driver IPP Printing NetWare Server/Client except Ndps Checking the Accessories AccessoriesChecking the Accessories Types of Cable That Can Be Used Connecting the Network CableConnecting the Network Cable Connecting the Network Cable Assigning an IP Address Entering the IP Address From the Control PanelNetwork SETTING? Assigning an IP AddressUse the 10-key pad Keys to enter the IP address Gateway Printing the Configuration Printing the Configuration Connecting the Computer and Copier Procedures Described in This ChapterSetting Up the Network Connections Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows MEPage Connecting the Computer and Copier Click Next Click Finish Windows NT Installing the Microsoft TCP/IP Printing ServiceSetting Up the LPR Connection Page Check the IPP Settings Using PageScope Light Windows 2000/ Windows XPPage Connecting a Copier to the NetWare Server Setting Up NetWare 4.x/ 5.x/ 6 Print Server ModeSetting Up NetWare 4.x/ 5.x/ 6 Remote Printer Mode NDSNC-6 Creating an Ndps Printer Agent Setting Up the Windows Computer for the NetWare Client Connecting the Computer and Copier Using PageScope Light What is PageScope Light?NC-6 System Requirements Accessing PageScope LightUsing PageScope Light About the Screen Layout Logging In as an Administrator About the File Download FunctionUsing PageScope Light Product Specifications AppendixTroubleshooting Konica Minolta Business TECHNOLOGIES, INC