Konica Minolta NC-6 user manual Setting Up the Network Connections

Page 29

7

Connecting the Computer and Copier

7.2Setting Up the Network Connections

7.2.1Peer-to-Peer Printing

Windows 95 (OSR 2.5)/ Windows 98/ Windows 98 SE/ Windows ME

Important

Before continuing to set up the network settings, check the following:

Check that the computer is set up to use the TCP/IP protocol.

Check that the copier is also set up to use the TCP/IP protocol.

Check that the printer driver has been installed on the computer.

(For instructions on installing the GDI driver, refer to “GDI Printer Controller” in the manual provided with the copier. For instructions on installing the optional PCL driver, refer to “PCL Printer Controller” in the manual provided with the PCL printer controller.)

1Click [Start] - [Settings] - [Printers] to open the “Printers” folder.

2Right-click the icon for the installed printer driver.

3Click [Properties] to open the Properties dialog box.

4Click the “Details” tab, and then click [Add Port].

5Select Other.

6Select Peer2Peer from the list of port types.

7Click [OK].

8Enter the copier IP address.

9Click [OK].

7-2

NC-6

Image 29

Contents Network Interface Card NC-6 Contents Product Specifications Troubleshooting Setting Up the Network ConnectionsFor the U.S.A User InstructionsFor Canada For EuropeFor countries not subject to Class B regulations For countries subject to Class B regulationsWelcome About PageScope Light Trademark AcknowledgementsGetting Ready For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows Selecting the Network Print MethodLPR For Windows PORT9100 TCP/IP protocol Windows XP Controller supports the system environments described below Checking the Setup Procedures Install the printer driver IPP Printing NetWare Server/Client except Ndps Accessories Checking the AccessoriesChecking the Accessories Types of Cable That Can Be Used Connecting the Network CableConnecting the Network Cable Connecting the Network Cable Entering the IP Address From the Control Panel Assigning an IP AddressAssigning an IP Address Network SETTING?Use the 10-key pad Keys to enter the IP address Gateway Printing the Configuration Printing the Configuration Procedures Described in This Chapter Connecting the Computer and CopierWindows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows ME Setting Up the Network ConnectionsPage Connecting the Computer and Copier Click Next Click Finish Windows NT Installing the Microsoft TCP/IP Printing ServiceSetting Up the LPR Connection Page Windows 2000/ Windows XP Check the IPP Settings Using PageScope LightPage Setting Up NetWare 4.x/ 5.x/ 6 Print Server Mode Connecting a Copier to the NetWare ServerNDS Setting Up NetWare 4.x/ 5.x/ 6 Remote Printer ModeNC-6 Creating an Ndps Printer Agent Setting Up the Windows Computer for the NetWare Client Connecting the Computer and Copier What is PageScope Light? Using PageScope LightNC-6 System Requirements Accessing PageScope LightUsing PageScope Light About the Screen Layout About the File Download Function Logging In as an AdministratorUsing PageScope Light Appendix Product SpecificationsTroubleshooting Konica Minolta Business TECHNOLOGIES, INC