Click the “Ports” tab, and then click [Add Port].
Click [Properties] to open the Properties dialog box.
Click [Start] - [Settings] - [Printers] to open the “Printers” folder.
6 When the Add Standard TCP/IP Printer Port Wizard appears, click [Next>].
7 Enter the IP address for the copier into the Printer Name or IP Address box, and then click [Next>].
8 Select Custom, and then click [Settings].
9 Select LPR in the Protocol group box, enter the name of the print queue in the Queue Name box (for example, “print”), and then click [OK].
✎ Note
Use half-pitch characters to enter the queue name.
1
2
3
4
5 In the Printer Ports dialog box, select Standard TCP/IP Port, and then click [New Port].
7.2.2 LPR Printing Windows 2000
✎ Important
Before continuing to set up the network settings, check the following: Check that the computer is set up to use the TCP/IP protocol. Check that the copier is also set up to use the TCP/IP protocol. Check that the printer driver has been installed on the computer.
(For instructions on installing the GDI driver, refer to “GDI Printer Controller” in the manual provided with the copier. For instructions on installing the optional PCL driver, refer to “PCL Printer Controller” in the manual provided with the PCL printer controller.)
Connecting the Computer and Copier
7