Konica Minolta NC-6 Assigning an IP Address, Entering the IP Address From the Control Panel

Page 22

Assigning an IP Address

5 Assigning an IP Address

5

From the control panel of the copier, assign an IP address to the copier.

Note

Always assign an IP address only after consulting your network administrator.

5.1Entering the IP Address From the Control Panel

Use the 10-key pad on the control panel to enter the IP address. (Example) To enter “192.168.0.10”

Note

If an element of the number is less than three digits, press the key to move the cursor into the area to the right of the current element.

NC-6

5-1

Image 22
Contents Network Interface Card NC-6 Contents Setting Up the Network Connections Product Specifications TroubleshootingFor Canada User InstructionsFor the U.S.A For EuropeFor countries subject to Class B regulations For countries not subject to Class B regulationsWelcome Trademark Acknowledgements About PageScope LightGetting Ready Selecting the Network Print Method For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ WindowsLPR For Windows PORT9100 TCP/IP protocol Windows XP Controller supports the system environments described below Checking the Setup Procedures Install the printer driver IPP Printing NetWare Server/Client except Ndps Checking the Accessories AccessoriesChecking the Accessories Connecting the Network Cable Connecting the Network CableTypes of Cable That Can Be Used Connecting the Network Cable Assigning an IP Address Entering the IP Address From the Control PanelNetwork SETTING? Assigning an IP AddressUse the 10-key pad Keys to enter the IP address Gateway Printing the Configuration Printing the Configuration Connecting the Computer and Copier Procedures Described in This ChapterSetting Up the Network Connections Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows MEPage Connecting the Computer and Copier Click Next Click Finish Setting Up the LPR Connection Installing the Microsoft TCP/IP Printing ServiceWindows NT Page Check the IPP Settings Using PageScope Light Windows 2000/ Windows XPPage Connecting a Copier to the NetWare Server Setting Up NetWare 4.x/ 5.x/ 6 Print Server ModeSetting Up NetWare 4.x/ 5.x/ 6 Remote Printer Mode NDSNC-6 Creating an Ndps Printer Agent Setting Up the Windows Computer for the NetWare Client Connecting the Computer and Copier Using PageScope Light What is PageScope Light?NC-6 Using PageScope Light Accessing PageScope LightSystem Requirements About the Screen Layout Logging In as an Administrator About the File Download FunctionUsing PageScope Light Product Specifications AppendixTroubleshooting Konica Minolta Business TECHNOLOGIES, INC