Konica Minolta NC-6 user manual

Page 35

❍ (Example) If the copier IP address is 192.168.0.10, enter: http://192.168.0.10/ipp.cgi

6 Click [Next>]. When a confirmation message appears, click [OK].

7 Follow the instructions that appear on the screen to complete the installation.

NC-6

Start up the Add Printer Wizard, and then click [Next>]. Select Network Printer, and then click [Next>].

Select Connect to a printer on the Internet or on your intranet. Enter “http://copier IP address/ipp.cgi” in the URL box.

2

3

4

5

Connecting the Computer and Copier

Setting Up the IPP Print Connection

Set up the IPP Print connection. In order to set up IPP printing, you must start by installing the printer driver. (For instructions on installing the GDI driver, refer to “GDI Printer Controller” in the manual provided with the copier. For instructions on installing the optional PCL driver, refer to “PCL Printer Controller” in the manual provided with the PCL printer controller.)

1 When using Windows 2000, click [Start] - [Settings] - [Printers] to open the “Printers” folder.

When using Windows XP, click [Start] - [Control Panel] - [Printers and Other Hardware] - [See a list of installed printers and fax printers.] to open the “Printers and Faxes” folder.

7

7-8

Image 35

Contents Network Interface Card NC-6 Contents Product Specifications Troubleshooting Setting Up the Network ConnectionsFor Europe User InstructionsFor the U.S.A For CanadaFor countries not subject to Class B regulations For countries subject to Class B regulationsWelcome About PageScope Light Trademark AcknowledgementsGetting Ready For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows Selecting the Network Print MethodLPR For Windows PORT9100 TCP/IP protocol Windows XP Controller supports the system environments described below Checking the Setup Procedures Install the printer driver IPP Printing NetWare Server/Client except Ndps Accessories Checking the AccessoriesChecking the Accessories Types of Cable That Can Be Used Connecting the Network CableConnecting the Network Cable Connecting the Network Cable Entering the IP Address From the Control Panel Assigning an IP AddressAssigning an IP Address Network SETTING?Use the 10-key pad Keys to enter the IP address Gateway Printing the Configuration Printing the Configuration Procedures Described in This Chapter Connecting the Computer and CopierWindows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows ME Setting Up the Network ConnectionsPage Connecting the Computer and Copier Click Next Click Finish Windows NT Installing the Microsoft TCP/IP Printing ServiceSetting Up the LPR Connection Page Windows 2000/ Windows XP Check the IPP Settings Using PageScope LightPage Setting Up NetWare 4.x/ 5.x/ 6 Print Server Mode Connecting a Copier to the NetWare ServerNDS Setting Up NetWare 4.x/ 5.x/ 6 Remote Printer ModeNC-6 Creating an Ndps Printer Agent Setting Up the Windows Computer for the NetWare Client Connecting the Computer and Copier What is PageScope Light? Using PageScope LightNC-6 System Requirements Accessing PageScope LightUsing PageScope Light About the Screen Layout About the File Download Function Logging In as an AdministratorUsing PageScope Light Appendix Product SpecificationsTroubleshooting Konica Minolta Business TECHNOLOGIES, INC