Connecting the Computer and Copier
7
7.2.5Connecting a Copier to the NetWare Server
Supported Environments
The controller supports the system environments described below.
NetWare version | Protocol | Emulation | Service mode |
NetWare 4.x | IPX | NDS / Bindery | PServer / NPrinter |
|
|
|
|
NetWare 5.x/6 | IPX | NDS / Bindery | PServer / NPrinter |
|
|
|
|
| TCP/IP |
| NDPS (lpr) |
|
|
|
|
Setting Up NetWare 4.x/ 5.x/ 6 Print Server Mode
1Log in with administrator privileges.
2Start up NWadmin.
3Select the print service system or category container, and then select “Print service quick setup” from the Tool menu.
4Enter settings into the Print server name, Printer name, Print queue name, and Volume name boxes, select Other/Unknown under Type name, and then save the settings.
Note
Specify the users who can use the queue, printer options, number of queues, and password. Refer to the NetWare documentation for details.
5Start up PageScope Light and log in to the Administrator mode, select NetWare Configuration from the “Network” tab, and then use PageScope Light to specify the following settings on the copier. (Refer to “8 Using PageScope Light” for details.)
6Load MONITOR.NLM using the NetWare server console.