Konica Minolta NC-6 user manual Install the printer driver

Page 15

2

Getting Ready

LPR / PORT 9100 Printing

1Check that all of the accessories have been included in the package. (“3 Checking the Accessories”)

2Connect the network cable. (“4 Connecting the Network Cable”)

3Specify the IP address, subnet mask, and default gateway settings for the copier. (“5 Assigning an IP Address”)

4Print the Configuration Page and check the settings. (“6 Printing the Configuration Page”)

Note

The Configuration Page cannot be printed for copiers that are not equipped with the optional PCL printer controller or fax option.

5Install the printer driver.

❍For instructions on installing the GDI driver, refer to “GDI Printer Controller” in the manual provided with the copier. For instructions on installing the optional PCL driver, refer to “PCL Printer Controller” in the manual provided with the PCL printer controller.

6Add a network port to the computer. (“7 Connecting the Computer and Copier”)

2-8

NC-6

Image 15

Contents Network Interface Card NC-6 Contents Product Specifications Troubleshooting Setting Up the Network ConnectionsFor Europe User InstructionsFor the U.S.A For CanadaFor countries not subject to Class B regulations For countries subject to Class B regulationsWelcome About PageScope Light Trademark AcknowledgementsGetting Ready For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows Selecting the Network Print MethodLPR For Windows PORT9100 TCP/IP protocol Windows XP Controller supports the system environments described below Checking the Setup Procedures Install the printer driver IPP Printing NetWare Server/Client except Ndps Accessories Checking the AccessoriesChecking the Accessories Connecting the Network Cable Connecting the Network CableTypes of Cable That Can Be Used Connecting the Network Cable Entering the IP Address From the Control Panel Assigning an IP AddressAssigning an IP Address Network SETTING?Use the 10-key pad Keys to enter the IP address Gateway Printing the Configuration Printing the Configuration Procedures Described in This Chapter Connecting the Computer and CopierWindows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows ME Setting Up the Network ConnectionsPage Connecting the Computer and Copier Click Next Click Finish Installing the Microsoft TCP/IP Printing Service Setting Up the LPR ConnectionWindows NT Page Windows 2000/ Windows XP Check the IPP Settings Using PageScope LightPage Setting Up NetWare 4.x/ 5.x/ 6 Print Server Mode Connecting a Copier to the NetWare ServerNDS Setting Up NetWare 4.x/ 5.x/ 6 Remote Printer ModeNC-6 Creating an Ndps Printer Agent Setting Up the Windows Computer for the NetWare Client Connecting the Computer and Copier What is PageScope Light? Using PageScope LightNC-6 Accessing PageScope Light Using PageScope LightSystem Requirements About the Screen Layout About the File Download Function Logging In as an AdministratorUsing PageScope Light Appendix Product SpecificationsTroubleshooting Konica Minolta Business TECHNOLOGIES, INC