Konica Minolta NC-6 user manual

Page 38

Connecting the Computer and Copier

7

5Start up PageScope Light and log in to the Administrator mode, select NetWare Configuration from the “Network” tab, and then use PageScope Light to specify the following settings on the copier.

❍ Refer to “8 Using PageScope Light” for details.

6Load MONITOR.NLM using the NetWare server console.

7From the NetWare Server console, display the print server screen, and check that the printer name entered in step 4 is displayed for Printer 0 and that it is listed as “Waiting for job”.

	NDS	Bindery
[Enable NetWare] [*]	Enable (Enabled if check box is selected.)

[Frame Type] [*]	Auto detect (Select the frame type suitable for your network
	environment.)

[Print Server Name]	Manually enter the name of the print server created in step 4.

[NDS Context Name]	The context name for the	No settings required
	Pserver

[Print Server Password]	(Only specify this setting if it is also set on the NetWare server.)

[Password Retype]	(Only specify this setting if it is also set on the NetWare server.)

[Preferred File Server]	No settings required	The file server name for the
		Pserver

[Preferred NDS Tree]	The tree name for Pserver	No settings required
	login

[Print Queue Scan Rate]	1 (Change as necessary.)
[*]

[Connection Mode]	Directory Services	Bindery

[Mode] [*]	NPrinter

* If changes are made to settings marked with “*”, turn the machine off, then on again.

NC-6

7-11

Image 38

Contents Network Interface Card NC-6 Contents Setting Up the Network Connections Product Specifications TroubleshootingFor Canada User InstructionsFor the U.S.A For EuropeFor countries subject to Class B regulations For countries not subject to Class B regulationsWelcome Trademark Acknowledgements About PageScope LightGetting Ready Selecting the Network Print Method For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ WindowsLPR For Windows PORT9100 TCP/IP protocol Windows XP Controller supports the system environments described below Checking the Setup Procedures Install the printer driver IPP Printing NetWare Server/Client except Ndps Checking the Accessories AccessoriesChecking the Accessories Types of Cable That Can Be Used Connecting the Network CableConnecting the Network Cable Connecting the Network Cable Assigning an IP Address Entering the IP Address From the Control PanelNetwork SETTING? Assigning an IP AddressUse the 10-key pad Keys to enter the IP address Gateway Printing the Configuration Printing the Configuration Connecting the Computer and Copier Procedures Described in This ChapterSetting Up the Network Connections Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows MEPage Connecting the Computer and Copier Click Next Click Finish Windows NT Installing the Microsoft TCP/IP Printing ServiceSetting Up the LPR Connection Page Check the IPP Settings Using PageScope Light Windows 2000/ Windows XPPage Connecting a Copier to the NetWare Server Setting Up NetWare 4.x/ 5.x/ 6 Print Server ModeSetting Up NetWare 4.x/ 5.x/ 6 Remote Printer Mode NDSNC-6 Creating an Ndps Printer Agent Setting Up the Windows Computer for the NetWare Client Connecting the Computer and Copier Using PageScope Light What is PageScope Light?NC-6 System Requirements Accessing PageScope LightUsing PageScope Light About the Screen Layout Logging In as an Administrator About the File Download FunctionUsing PageScope Light Product Specifications AppendixTroubleshooting Konica Minolta Business TECHNOLOGIES, INC