Konica Minolta NC-6 user manual Appendix, Product Specifications

Page 48

Appendix

9 Appendix

9.1Product Specifications

9

Interface

Ethernet 10/100Base-T /TX (RJ-45)

 

 

TCP/IP Services

ARP, BootP*1, DHCP, DNS, IPP, lpr/lpd, Raw Socket, HTTPd

 

1.1, Telnetd, SLP, AutoIP*2

Netware Services

Bindery, NDS, PServer mode, NPrinter mode, NDPS

 

 

 

Frame Type (802.3, 802.2, 802.3 SNAP, Ethernet-II,

 

AutoDetect)

 

 

*1 This device supports the BootP protocol, which is part of the TCP/IP protocol. If the BootP server has been enabled with the Network Setup utility, the IP address for the copier will be automatically assigned. For details, refer to the User Manual included on the PageScope CD.

*2 AutoIP is a function that allows the network interface card to automatically assign IP addresses that begin with 169.254 and use a subnet mask setting of 255.255.0.0. If there are two or more devices on the same network that use the AutoIP function, these devices can communicate with each other.

NC-6

9-1

Image 48
Contents Network Interface Card NC-6 Contents Setting Up the Network Connections Product Specifications TroubleshootingUser Instructions For the U.S.AFor Canada For EuropeFor countries subject to Class B regulations For countries not subject to Class B regulationsWelcome Trademark Acknowledgements About PageScope LightGetting Ready Selecting the Network Print Method For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ WindowsLPR For Windows PORT9100 TCP/IP protocol Windows XP Controller supports the system environments described below Checking the Setup Procedures Install the printer driver IPP Printing NetWare Server/Client except Ndps Checking the Accessories AccessoriesChecking the Accessories Connecting the Network Cable Connecting the Network CableTypes of Cable That Can Be Used Connecting the Network Cable Assigning an IP Address Entering the IP Address From the Control PanelNetwork SETTING? Assigning an IP AddressUse the 10-key pad Keys to enter the IP address Gateway Printing the Configuration Printing the Configuration Connecting the Computer and Copier Procedures Described in This ChapterSetting Up the Network Connections Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows MEPage Connecting the Computer and Copier Click Next Click Finish Installing the Microsoft TCP/IP Printing Service Setting Up the LPR ConnectionWindows NT Page Check the IPP Settings Using PageScope Light Windows 2000/ Windows XPPage Connecting a Copier to the NetWare Server Setting Up NetWare 4.x/ 5.x/ 6 Print Server ModeSetting Up NetWare 4.x/ 5.x/ 6 Remote Printer Mode NDSNC-6 Creating an Ndps Printer Agent Setting Up the Windows Computer for the NetWare Client Connecting the Computer and Copier Using PageScope Light What is PageScope Light?NC-6 Accessing PageScope Light Using PageScope LightSystem Requirements About the Screen Layout Logging In as an Administrator About the File Download FunctionUsing PageScope Light Product Specifications AppendixTroubleshooting Konica Minolta Business TECHNOLOGIES, INC