Konica Minolta NC-6 user manual Gateway

Page 25

5

Assigning an IP Address

8Use the 10-key pad and

the and keys to enter the subnet mask address.

✎

Note

The subnet mask address shown in the illustration is only an example. Always check with your network administrator before entering a subnet mask address.

9Press the [Yes] key to confirm the setting. The “NETWORK SETTING” menu appears again.

❍ Proceed to enter the default gateway setting.

10While the “NETWORK SETTING”

menu is displayed, press the [3] key on the 10-key pad to select

“GATEWAY”.

11Use the 10-key pad and

the and keys to enter the default gateway address.

✎

Note

The default gateway address shown in the illustration is only an example. Always check with your network administrator before entering a default gateway address.

12 Press the [Yes] key to confirm the setting.

❍The “NETWORK SETTING” menu appears again. Finally, the specified IP address, network mask, and default gateway settings are registered on the copier itself. In order to register these settings, the copier must be restarted by turning it off, then on again.

13 While the “NETWORK SETTING” menu is displayed, press the [No] key or the [Panel Reset] key to select “PLEASE RE-START POWER SUPPLY OFF/ON”.

14 Set the power switch on the copier to “O”, then “I” to restart the copier.

5-4

NC-6

Image 25

Contents Network Interface Card NC-6 Contents Product Specifications Troubleshooting Setting Up the Network ConnectionsFor the U.S.A User InstructionsFor Canada For EuropeFor countries not subject to Class B regulations For countries subject to Class B regulationsWelcome About PageScope Light Trademark AcknowledgementsGetting Ready For Windows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows Selecting the Network Print MethodLPR For Windows PORT9100 TCP/IP protocol Windows XP Controller supports the system environments described below Checking the Setup Procedures Install the printer driver IPP Printing NetWare Server/Client except Ndps Accessories Checking the AccessoriesChecking the Accessories Connecting the Network Cable Connecting the Network CableTypes of Cable That Can Be Used Connecting the Network Cable Entering the IP Address From the Control Panel Assigning an IP AddressAssigning an IP Address Network SETTING?Use the 10-key pad Keys to enter the IP address Gateway Printing the Configuration Printing the Configuration Procedures Described in This Chapter Connecting the Computer and CopierWindows 95 OSR 2.5/ Windows 98/ Windows 98 SE/ Windows ME Setting Up the Network ConnectionsPage Connecting the Computer and Copier Click Next Click Finish Setting Up the LPR Connection Installing the Microsoft TCP/IP Printing ServiceWindows NT Page Windows 2000/ Windows XP Check the IPP Settings Using PageScope LightPage Setting Up NetWare 4.x/ 5.x/ 6 Print Server Mode Connecting a Copier to the NetWare ServerNDS Setting Up NetWare 4.x/ 5.x/ 6 Remote Printer ModeNC-6 Creating an Ndps Printer Agent Setting Up the Windows Computer for the NetWare Client Connecting the Computer and Copier What is PageScope Light? Using PageScope LightNC-6 Using PageScope Light Accessing PageScope LightSystem Requirements About the Screen Layout About the File Download Function Logging In as an AdministratorUsing PageScope Light Appendix Product SpecificationsTroubleshooting Konica Minolta Business TECHNOLOGIES, INC