Controlling the Projector via LAN
Making General Settings for the Network (Network –
General)
Setting for Sending E-mail when an Error Occurs
(Mail – Originator Settings)
On this screen, you can make general settings relating to the network.
Items | Description |
Projector | Setting the projector name. |
Name |
|
|
|
Auto | Setting the time interval in |
Logout | which the projector will be |
Time | automatically disconnected |
| from the network in units of a |
| minute (from 1 to 65535 |
| minutes). If the set value is |
| made 0, the Auto Logout |
| function is disabled. |
Data Port | Setting the TCP port number |
| used when exchanging a data |
| with the projector (from 1025 to |
| 65535). |
|
|
Search | Setting the port number used |
Port | when searching for the |
| projector (from 1025 to 65535). |
After clicking the “Apply” button, the set val- ues appear. Confirm that the values are set properly, and then click the “Confirm” button.
Note
•After setting items, wait for 10 seconds and then
•Projector Name can be up to 12 characters.
•You can input the characters below :
(When
On this screen, you can make settings for sending
Items | Setting example / Remarks |
SMTP | Setting an SMTP server |
Server | address for |
| sion. |
| e.g.1 : 192.168.150.253 |
| e.g.2 : smtp123.eiki.co.jp |
| * When using a domain name, |
| make settings for the DNS |
| server. |
|
|
Originator | Setting the projector’s |
address. The | |
Address | here becomes Originator |
| Address. |
Originator | Setting the sender’s name. |
Name | The name set here appears in |
| the “Originator Name” column |
| of the body of the message. |
|
|
Note
•SMTP Server, Originator
•You can input the characters below:
SMTP Server and Originator
(You can input “@” only one time for “Origi- nator
Originator Name :
•If the settings of “3. Setting up a Network Connection for the Projector” on pages 21 and 22 are incorrectly set,
26