Video Wall Projection
4 Turn on all of the projectors.
5 Access the projector 1 from the computer via Internet Explorer.
(See “Controlling the Projector Using Internet Explorer (Version 5.0 or later)” on page 23 for the details.)
6 Click “Stack” on the menu.
7 Select “Master” on “Stack Setting”.
• “Slave Address” display will appear.
8 Make the IP address for each pro- jector as shown below.
•Slave 1 : 192.168.150.4
•Slave 2 : 192.168.150.5
•Slave 3 : 192.168.150.6
9 Click the “Apply” button.
10 Access the projector 2 from the computer via Internet Explorer.
(See “Controlling the Projector Using Internet Explorer (Version 5.0 or later)” on page 23 for the details.)
11 Click “Stack” on the menu.
12 
Select “Slave” on “Stack Setting”.
48